View in the flip catalogue
To all specifications

Packaging unit

Piece

Detailed information

The single chamber Uno target point sampler is designed to take a targeted sample from an area or layer of a wide variety of bulk materials.

The zone sampler allows a sample to be taken from a desired depth or zone within a bag, drum, silo, big bag or pile.
Once taken, the target point sample can be analysed individually, e.g. to investigate variability within a material or between different layers of material, or multiple target point samples can be taken to produce a composite sample that is representative of the whole material. This method ensures that the final sample is representative, i.e. reflects the average composition of the material, which is essential for correct analysis and quality control.

The Uno sampler in stainless steel 1.4404 (V4A) with PTFE core combines the advantages of the robust and inert stainless steel sampler with the lighter weight of PTFE. The zone sampler is extremely robust and has excellent chemical resistance.

The samplers are marked with coloured caps for easy identification and to prevent mix-ups when using multiple samplers for different bulk solids.

The robust design of the Uno sampler ensures a long service life, even with regular use. The high quality of workmanship ensures reliability and precision with every sample.

Typical application area of the product

The Uno sampler is suitable for precise and targeted sampling of all types of bulk materials and is used wherever it is necessary to take samples from one or more zones or layers in order to obtain a targeted or comprehensive analysis of the composition, quality, impurities or inconsistencies of a material. For example, in the food industry to check the homogeneity and quality of bulk materials such as grain, maize, nuts, powders or granules; in the pharmaceutical industry for quality control of raw materials, intermediate and finished products; in the chemical industry to analyse chemicals, powders to ensure homogeneity of mixture and compliance with specifications; in the construction industry, materials science, research and development to examine bulk materials such as sand, gravel and other materials.
How to use the product
  1. Turn the handle of the zone collector clockwise. The collector is now closed and can be pierced into the powder/granulate.
  2. At the desired depth, turn the handle of the zone collector counterclockwise. The collection chamber opens and is filled with sample.
  3. Turn the handle on the collector clockwise. The collector is now closed and can be removed from the powder/granulate.
  4. Open the collector and empty the sample onto an appropriately prepared surface.
zer12_v25_en_ex_vxa.pdf zer12_v25_en_ex_vxa.pdf
5316-1xxx_unosammler_gebrauchsanleitung.pdf 5316-1xxx_unosammler_gebrauchsanleitung.pdf
  • Uno collector target point sampler
  • Caps for color coding

Specifications

General material

1.4404 (316L)
Stainless steel 1.4404, AISI 316L

General material

PTFE
Polytetrafluoroethylene

Further materials

NBR
Nitrile butadiene rubber

Sample chamber details

Number of collection openings:
1 itms
Sample volume per chamber:
14 ml
Sample quantity:
14 ml

Lance dimensions

Pipe Ø:
25 mm
Outer Ø:
25 mm
Plunge depth:
430 mm
Total length:
583 mm

Collecting chamber dimensions

Start of the collecting chamber:
98 mm
Chamber width:
12 mm
Chamber length:
80 mm
To the list of chemical resistance

Complementary products

Emptying device Emptying device

Emptying device

Convenient emptying rack made of 304 stainless steel for multi-collectors. Saves time, prevents contamination and sample loss. Simply place the multi-collector on the rack, place sample containers under the funnels and open the chambers - done.
Quali-Paper for zone collectors Quali-Paper for zone collectors

Quali-Paper for zone collectors

The sample paper is lint and fibre free, ensuring a clean and reliable base without distorting the sample.
Cleaning brushes

Cleaning brushes

Cleaning brushes provide effective and thorough cleaning in a variety of areas. Made from high quality stainless steel and fitted with durable bristles, they effortlessly remove dirt, debris and contaminants from surfaces.
Depth stop for sampler

Depth stop for sampler

The depth limiter can be screwed to any height of the sampler using a C-clamp screw. This ensures that the sampler penetrates to the same desired depth each time it is inserted.
Closure seal close-it food & pharma 95x95 Closure seal close-it food & pharma 95x95

Closure seal close-it food & pharma 95x95

In response to many requests from our customers, we have developed close-it food & pharma, a closure seal with an adhesive approved for foodstuffs. The adhesive strength of the adhesive is almost the same as the original, the tried and tested close-it from Bürkle. close-it food & pharma also prevents bulk goods from trickling out after sampling.

The adhesive complies with European food directives. Like the original, close-it food & pharma has an aluminium foil barrier layer. This makes close-it food & pharma suitable for sampling foodstuffs, pharmaceuticals, cosmetics, food supplements, even frozen goods - in short, anywhere where special purity is required.
Control seal close-it 95x95 Control seal close-it 95x95

Control seal close-it 95x95

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner.

close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminium/paper) and seals the container hermetically (vapour barrier). This virtually prevents hygroscopic powders from clumping together.

The labels are available in different colours. With printing in red, blue, green, yellow, black or neutral (without printing in white).

close-it can be written on with ball-point pen, pencil or felt-tip marker.

The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.
Closure seal close-it food & pharma Maxi 150x150 Closure seal close-it food & pharma Maxi 150x150

Closure seal close-it food & pharma Maxi 150x150

In response to many requests from our customers, we have developed close-it food & pharma, a closure seal with an adhesive approved for foodstuffs. The adhesive strength of the adhesive is almost the same as the original, the tried and tested close-it from Bürkle. close-it food & pharma also prevents bulk goods from trickling out after sampling.

The adhesive complies with European food directives. Like the original, close-it food & pharma has an aluminium foil barrier layer. This makes close-it food & pharma suitable for sampling foodstuffs, pharmaceuticals, cosmetics, food supplements, even frozen goods - in short, anywhere where special purity is required.
Control seal close-it maxi 150x150 Control seal close-it maxi 150x150

Control seal close-it maxi 150x150

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner.

close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminium/paper) and seals the container hermetically (vapour barrier). This virtually prevents hygroscopic powders from clumping together.

The labels are available in different colours. With printing in red, blue, green, yellow, black or neutral (without printing in white).

close-it can be written on with ball-point pen, pencil or felt-tip marker.

The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.

Similar products

Multi-stage sampler multi-sampler 316L (1.4404)/PTFE Multi-stage sampler multi-sampler 316L (1.4404)/PTFE

Multi-stage sampler multi-sampler 316L (1.4404)/PTFE

The multi-sampler with separate collection chambers is a sampler for simultaneous sampling of multiple target points from different areas or layers of bulk solids. It combines the advantages of rugged and inert stainless steel with the light weight of PTFE.
Multi-stage sampler multi-sampler 316L (1.4404) Multi-stage sampler multi-sampler 316L (1.4404)

Multi-stage sampler multi-sampler 316L (1.4404)

The multi sampler with separate collection chambers is a special sampler for the simultaneous sampling of several target points from different zones or layers of bulk materials. The stainless steel multi sampler offers excellent chemical resistance.
Multi-stage sampler multi-sampler, aluminium Multi-stage sampler multi-sampler, aluminium

Multi-stage sampler multi-sampler, aluminium

The multi-sampler with separate collection chambers is a sampler for simultaneous collection of multiple target point samples from different zones or layers of bulk material. Aluminium is very light, making it easy to handle and transport.
Aluminium all-layer sampler Aluminium all-layer sampler

Aluminium all-layer sampler

The all-layer sampler with open inner tube is the ideal sampler for taking all-layer or mixed samples from all types of bulk materials, from the finest powders to larger grains.
All-layer sampler 316L (1.4404) All-layer sampler 316L (1.4404)

All-layer sampler 316L (1.4404)

The all-layer sampler with open inner tube is the ideal sampler for taking all-layer or mixed samples from all types of bulk materials, from the finest powders to larger grains.
Jumbo sampler - zone sampler for larger volumes, all-layer design Jumbo sampler - zone sampler for larger volumes, all-layer design

Jumbo sampler - zone sampler for larger volumes, all-layer design

Thanks to its open inner tube with no separate chambers, the all-layer Jumbo sampler ensures a homogeneous mixed sample that accurately reflects the overall composition of the material, even with heterogeneous materials.
Jumbo sampler zone sampler for larger volumes, Multi Jumbo sampler zone sampler for larger volumes, Multi

Jumbo sampler zone sampler for larger volumes, Multi

The Multi jumbo sampler separates sample material using separators, allowing multiple point samples to be taken from different layers of a bulk material. These can be analysed specifically or combined to form a mixed sample. Autoclavable and flame retardant for minimal risk of contamination.