Packaging unit

Piece

Detailed information

The 316L (1.4404) stainless steel all-layer sampler offers excellent chemical resistance and is resistant to a wide range of chemicals and detergents.

The smooth surface of the stainless steel facilitates hygiene, cleaning and disinfection. The collector is easily autoclaved and flame treated, minimising the risk of sample contamination.

Stainless steel is corrosion resistant, making it ideal for use in humid or aggressive environments such as those found in the food, pharmaceutical and chemical industries.

The sampler is extremely robust, even with intensive use or abrasive particles.

The all-layer sampler with open inner tube is the ideal sampler for taking all-layer or mixed samples from all types of bulk materials, from the finest powders to larger grains.
This zone sampler ensures representative sampling through all layers or zones of the sample material.

Obtaining a homogeneous and representative all-layer composite sample from heterogeneous material is critical, especially when the composition varies within the bin, silo or pile. The all-layer zone sampler ensures that the sample taken reflects the overall composition of the material, which is essential for analysis and quality control.

The lances can be used both vertically and horizontally, making it a very versatile sampler for different types of containers.

The open inner tube, with no separate chambers, allows sampling across the entire volume of the sampler, providing a generous collection volume for more detailed analysis of bulk materials.

The design with minimal gap between the inner and outer tube reduces the risk of contamination and increases sampling accuracy. The removable tip also facilitates cleaning and effectively prevents cross-contamination between different samples.

Thanks to its robust design, the all-layer sampler promises a long service life, even with regular use. The high quality workmanship ensures reliability and precision with every sample.

Typical application area of the product

The all-layer sampler is widely used in various industries where it is important to take representative samples from different layers or areas of a material.

This is particularly important in quality control and quality management in industry, especially in the food, pharmaceutical, chemical and building materials industries, to check compliance with quality standards. In research and development to analyse the composition, properties or impurities of a material. In raw material extraction and processing to assess the quality and composition of a material.

A representative sample is essential for accurate test results.

How to use the product

Turn the handle of the all-layer sampler clockwise, it is now closed and can be pierced into the powder/granulate.
At the desired depth, turn the handle of the collector counterclockwise, the collection chambers are opened and filled with sample.
By turning the handle clockwise again, the collector is closed again and can be removed from the powder/granulate.
Turn the all-layer collector upside down and empty the all-layer sample through the open inner tube into a suitable collecting vessel.

zer12_v25_en_ex_vxa.pdf

5316-2xxx_Allschichtsammler_Edelstahl_Gebrauchsanleitung.pdf

All-layer sampler 1.4404 (V4A)

Specifications

General material

1.4404 (316L)
Stainless steel 1.4404, AISI 316L

Further materials

NBR
Nitrile butadiene rubber

Sample chamber details

Number of collection openings:: 3 St
Sample quantity:: 70 ml

Lance dimensions

Pipe Ø:: 25 mm
Plunge depth:: 430 mm
Total length:: 576 mm
Outer Ø:: 25 mm

Collecting chamber dimensions

Chamber length:: 80 mm
Start of the collecting chamber:: 102 mm
Chamber width:: 12 mm
Distance between the chambers:: 55.5 mm

To the list of chemical resistance

Complementary products

Control seal close-it 95x95

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner.

close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminium/paper) and seals the container hermetically (vapour barrier). This virtually prevents hygroscopic powders from clumping together.

The labels are available in different colours. With printing in red, blue, green, yellow, black or neutral (without printing in white).

close-it can be written on with ball-point pen, pencil or felt-tip marker.

The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.

Control seal close-it maxi 150x150

The labels are available in different colours. With printing in red, blue, green, yellow, black or neutral (without printing in white).

close-it can be written on with ball-point pen, pencil or felt-tip marker.

Closure seal close-it food & pharma 95x95

In response to many requests from our customers, we have developed close-it food & pharma, a closure seal with an adhesive approved for foodstuffs. The adhesive strength of the adhesive is almost the same as the original, the tried and tested close-it from Bürkle. close-it food & pharma also prevents bulk goods from trickling out after sampling.

The adhesive complies with European food directives. Like the original, close-it food & pharma has an aluminium foil barrier layer. This makes close-it food & pharma suitable for sampling foodstuffs, pharmaceuticals, cosmetics, food supplements, even frozen goods - in short, anywhere where special purity is required.

Closure seal close-it food & pharma Maxi 150x150

close-it tape food & pharma

Besides the individually detachable close-it and close-it food & pharma closure labels, our repeatedly tested and proven control seal is now also available on a continuous roller. This helps you discover whether you require only a small piece, for example for closing a small hole, or for marking a specific point. Or whether you want to repair a long crack or a large hole quickly, reliably and easily. With its extremely strong adhesive strength, close-it tape holds on the most diverse bases, where the glue effect of normal adhesive tape quickly reaches its maximum capacity.

For universal use, we have kept the adhesive tape close-it tape in white with tear-off lines. It can be labelled with permanent ink and locks gas-proof. Available in the classic close-it design, as well as close-it tape food & pharma, with a food-compatible adhesive.