Detailed information

Thanks to its open inner tube with no separate chambers, the Jumbo all-layer collector ensures a homogeneous mixed sample that accurately reflects the overall composition of the material, even in heterogeneous materials.

The open inner tube allows easy cleaning and the tip is removable. The sample is simply emptied through the open handle.

The zone sampler is easily autoclaved and flamed, minimising the risk of sample contamination.

The Jumbo zone sampler is used for sampling through all layers, particularly of coarse-grained bulk materials. The long sampling lances with 50 mm tube diameter and the extra large chamber volume allow large quantities of samples to be taken with large grain sizes.

This zone sampler ensures representative sampling through all layers or zones of the sample material and is essential for accurate analysis and quality control in various industries.

With lances that can be used both vertically and horizontally, this sampler offers maximum flexibility when sampling from different types of bins, silos or piles.

Typical application area of the product

The Jumbo sampler is widely used in various industries where it is important to take representative samples from different layers or areas of a material with a large particle size.

This is particularly important in quality control and quality management in industry, especially in the food, pharmaceutical, chemical and building materials industries, to check compliance with quality standards. In research and development to analyse the composition, properties or impurities of a material. In raw material extraction and processing to assess the quality and composition of a material.

A representative sample is essential for accurate test results.

How to use the product

Turn the handle of the all-layer sampler clockwise, it is now closed and can be inserted into the powder/granulate.
At the desired depth, turn the handle of the collector counterclockwise, the collection chambers are opened and filled with sample.
By turning the handle clockwise again, the collector is closed again and can be removed from the powder/granulate.
Turn the all-layer collector upside down and empty the all-layer sample through the open inner tube into a suitable collecting vessel.

zer12_v25_en_ex_vxa.pdf

5319-1xxx_jumbo-sammler_allschicht_gebrauchsanleitung.pdf

Jumbo sampler zone sampler for larger quantities, all-layer

Specifications

General material

Al
Aluminium

General material

1.4301 (AISI 304)
Stainless steel (1.4301), AISI 304

Lance dimensions

Pipe Ø:: 50 mm
Outer Ø:: 50 mm
Plunge depth:: 850 mm
Total length:: 950 mm

Collecting chamber dimensions

Chamber length:: 100 mm
Chamber width:: 25 mm
Distance between the chambers:: 180 mm
Start of the collecting chamber:: 123 mm

Sample chamber details

Number of collection openings:: 3 itms
Sample quantity:: 880 ml

To the list of chemical resistance

Complementary products

Control seal close-it 95x95

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner.

close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminium/paper) and seals the container hermetically (vapour barrier). This virtually prevents hygroscopic powders from clumping together.

The labels are available in different colours. With printing in red, blue, green, yellow, black or neutral (without printing in white).

close-it can be written on with ball-point pen, pencil or felt-tip marker.

The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.

Control seal close-it maxi 150x150

The labels are available in different colours. With printing in red, blue, green, yellow, black or neutral (without printing in white).

close-it can be written on with ball-point pen, pencil or felt-tip marker.

Closure seal close-it food & pharma 95x95

In response to many requests from our customers, we have developed close-it food & pharma, a closure seal with an adhesive approved for foodstuffs. The adhesive strength of the adhesive is almost the same as the original, the tried and tested close-it from Bürkle. close-it food & pharma also prevents bulk goods from trickling out after sampling.

The adhesive complies with European food directives. Like the original, close-it food & pharma has an aluminium foil barrier layer. This makes close-it food & pharma suitable for sampling foodstuffs, pharmaceuticals, cosmetics, food supplements, even frozen goods - in short, anywhere where special purity is required.