Detailed information

The multi-sampler in stainless steel 316L (1.4404) with PTFE core combines the advantages of the robust and inert stainless steel sampler with the light weight of PTFE. The zone sampler is extremely robust, has excellent chemical resistance and is also more cost effective than an all stainless steel sampler.

The excellent sliding properties of PTFE make it easy to rotate, making it ideal for demanding applications. The even smaller gap between the chamber and the tube also minimises particle build-up.

The multi-sampler with separate sampling chambers is a dedicated sampler for simultaneous sampling of multiple target points from different zones or layers of a wide variety of bulk solids.

The zone sampler allows differentiated and representative sampling from different depths or areas within a bag, drum, silo, big bag or heap. The multi-zone sampler is particularly useful in situations where the composition of the material varies with depth or across the surface and a single sample is not sufficient to accurately characterise the entire material.

The target point samples can be analysed individually after collection to investigate variability within a material or between different layers of material, or they can be subsequently mixed to produce a composite sample that is representative of the entire material. This method ensures that the final sample is representative, i.e. reflects the average composition of the material, which is essential for correct analysis and quality control.

The lances can be used both vertically and horizontally, making the sampler a very versatile sampler for different containers.

The design with minimal gap between the inner and outer tube reduces the risk of contamination and increases the accuracy of sampling. The removable tip also facilitates cleaning to effectively prevent cross-contamination between different samples.

Colour-coded caps facilitate identification and prevent confusion when using multiple samplers for different bulk solids.

The robust design of the multi-sampler ensures a long service life, even with regular use. The high quality workmanship ensures reliability and precision with every sample taken.

Typical application area of the product

The multi-sampler is used where it is necessary to take samples from several zones or layers simultaneously in order to obtain a comprehensive analysis of the composition, quality, impurities or inconsistencies of a material. For example, in the food industry to check the homogeneity and quality of bulk materials such as grain, corn, nuts, powders or granules; in the pharmaceutical industry for quality control of raw materials, intermediate and finished products; in the chemical industry to analyse chemicals, powders to ensure homogeneity of mixture and compliance with specifications; in the construction industry, materials science, research and development to test bulk materials such as sand, gravel and other materials.

How to use the product

Turn the handle of the multi-collector clockwise, the multi-collector is now closed and can be pierced into the powder/granulate.
At the desired depth, turn the handle of the collector counter-clockwise.
This opens the collection chambers and fills them with sample.
Turn the handle clockwise to close the collector and remove it from the powder/granulate.
Open the multi-collector and empty the sample onto a suitable surface or use an emptying device (see accessories).

zer12_v25_en_ex_vxa.pdf

5316-0xxx_multisammler_v4a_ptfe_gebrauchsanleitung.pdf

Multi-stage sampler multi-sampler, 316L (1.4404)/PTFE
Colour coding caps

Specifications

General material

1.4404 (316L)
Stainless steel 1.4404, AISI 316L

General material

PTFE
Polytetrafluoroethylene

Further materials

NBR
Nitrile butadiene rubber

Sample chamber details

Sample volume per chamber:: 14 ml
Number of collection openings:: 3 St
Sample quantity:: 42 ml

Lance dimensions

Pipe Ø:: 25 mm
Plunge depth:: 430 mm
Total length:: 582 mm
Outer Ø:: 25 mm

Collecting chamber dimensions

Chamber length:: 80 mm
Start of the collecting chamber:: 97 mm
Chamber width:: 12 mm
Distance between the chambers:: 56.5 mm

To the list of chemical resistance

Complementary products

Control seal close-it 95x95

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner.

close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminium/paper) and seals the container hermetically (vapour barrier). This virtually prevents hygroscopic powders from clumping together.

The labels are available in different colours. With printing in red, blue, green, yellow, black or neutral (without printing in white).

close-it can be written on with ball-point pen, pencil or felt-tip marker.

The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.