View in the flip catalogue
To all specifications

Packaging unit

Piece

Detailed information

The 316L (1.4404) stainless steel multi-sampler offers excellent chemical resistance and is resistant to a wide range of chemicals and cleaning agents.

The smooth surface of the stainless steel facilitates hygiene, cleaning and disinfection. The sampler is easily autoclaved and flame sterilised, minimising the risk of sample contamination.

Stainless steel is corrosion resistant, making it ideal for use in humid or aggressive environments such as those found in the food, pharmaceutical and chemical industries.

The sampler is extremely robust, even with intensive use or abrasive particles.

The multi-sampler with separate sampling chambers is a dedicated sampler for simultaneous sampling of multiple target points from different zones or layers of a wide variety of bulk solids.

The zone sampler allows differentiated and representative sampling from different depths or areas within a bag, drum, silo, big bag or heap. The multi-zone sampler is particularly useful in situations where the composition of the material varies with depth or across the surface and a single sample is not sufficient to accurately characterise the entire material.

The target point samples can be analysed individually after collection to investigate variability within a material or between different layers of material, or they can be subsequently mixed to produce a composite sample that is representative of the entire material. This method ensures that the final sample is representative, i.e. reflects the average composition of the material, which is essential for correct analysis and quality control.

The lances can be used both vertically and horizontally, making the sampler a very versatile sampler for different containers.

The design with minimal gap between the inner and outer tube reduces the risk of contamination and increases the accuracy of sampling. The removable tip also facilitates cleaning to effectively prevent cross-contamination between different samples.

Colour-coded caps facilitate identification and prevent confusion when using multiple samplers for different bulk solids.

The robust design of the multi-sampler ensures a long service life, even with regular use. The high quality workmanship ensures reliability and precision with every sample taken.

Typical application area of the product

The multi-sampler is used where it is necessary to take samples from several zones or layers simultaneously in order to obtain a comprehensive analysis of the composition, quality, impurities or inconsistencies of a material. For example, in the food industry to check the homogeneity and quality of bulk materials such as grain, corn, nuts, powders or granules; in the pharmaceutical industry for quality control of raw materials, intermediate and finished products; in the chemical industry to analyse chemicals, powders to ensure homogeneity of mixture and compliance with specifications; in the construction industry, materials science, research and development to test bulk materials such as sand, gravel and other materials.
How to use the product
  1. Turn the handle of the multi-collector clockwise, the multi-collector is now closed and can be pierced into the powder/granulate.
  2. At the desired depth, turn the handle of the collector counter-clockwise.
  3. This opens the collection chambers and fills them with sample.
  4. Turn the handle clockwise to close the collector and remove it from the powder/granulate.
  5. Open the multi-collector and empty the sample onto a suitable surface or use an emptying device (see accessories).
zer12_v25_en_ex_vxa.pdf zer12_v25_en_ex_vxa.pdf
5316-3xxx_multisammler_edelstahl_gebrauchsanleitung.pdf 5316-3xxx_multisammler_edelstahl_gebrauchsanleitung.pdf
  • Multi-stage sampler multi-sampler, 316L (1.4404)
  • Colour coding caps

Specifications

General material

1.4404 (316L)
Stainless steel 1.4404, AISI 316L

Further materials

NBR
Nitrile butadiene rubber

Further materials

PTFE
Polytetrafluoroethylene

Lance dimensions

Pipe Ø:
25 mm
Outer Ø:
25 mm
Plunge depth:
430 mm
Total length:
580 mm

Sample chamber details

Sample volume per chamber:
14 ml
Number of collection openings:
3 itms
Sample quantity:
42 ml

Collecting chamber dimensions

Chamber length:
80 mm
Start of the collecting chamber:
97 mm
Chamber width:
12 mm
Distance between the chambers:
56.5 mm
To the list of chemical resistance

Complementary products

Control seal close-it 95x95 Control seal close-it 95x95

Control seal close-it 95x95

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner.

close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminium/paper) and seals the container hermetically (vapour barrier). This virtually prevents hygroscopic powders from clumping together.

The labels are available in different colours. With printing in red, blue, green, yellow, black or neutral (without printing in white).

close-it can be written on with ball-point pen, pencil or felt-tip marker.

The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.
Control seal close-it maxi 150x150 Control seal close-it maxi 150x150

Control seal close-it maxi 150x150

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner.

close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminium/paper) and seals the container hermetically (vapour barrier). This virtually prevents hygroscopic powders from clumping together.

The labels are available in different colours. With printing in red, blue, green, yellow, black or neutral (without printing in white).

close-it can be written on with ball-point pen, pencil or felt-tip marker.

The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.
Closure seal close-it food & pharma 95x95 Closure seal close-it food & pharma 95x95

Closure seal close-it food & pharma 95x95

In response to many requests from our customers, we have developed close-it food & pharma, a closure seal with an adhesive approved for foodstuffs. The adhesive strength of the adhesive is almost the same as the original, the tried and tested close-it from Bürkle. close-it food & pharma also prevents bulk goods from trickling out after sampling.

The adhesive complies with European food directives. Like the original, close-it food & pharma has an aluminium foil barrier layer. This makes close-it food & pharma suitable for sampling foodstuffs, pharmaceuticals, cosmetics, food supplements, even frozen goods - in short, anywhere where special purity is required.
Closure seal close-it food & pharma Maxi 150x150 Closure seal close-it food & pharma Maxi 150x150

Closure seal close-it food & pharma Maxi 150x150

In response to many requests from our customers, we have developed close-it food & pharma, a closure seal with an adhesive approved for foodstuffs. The adhesive strength of the adhesive is almost the same as the original, the tried and tested close-it from Bürkle. close-it food & pharma also prevents bulk goods from trickling out after sampling.

The adhesive complies with European food directives. Like the original, close-it food & pharma has an aluminium foil barrier layer. This makes close-it food & pharma suitable for sampling foodstuffs, pharmaceuticals, cosmetics, food supplements, even frozen goods - in short, anywhere where special purity is required.
Emptying device Emptying device

Emptying device

Convenient emptying rack made of 304 stainless steel for multi-collectors. Saves time, prevents contamination and sample loss. Simply place the multi-collector on the rack, place sample containers under the funnels and open the chambers - done.
Quali-Paper for zone collectors Quali-Paper for zone collectors

Quali-Paper for zone collectors

The sample paper is lint and fibre free, ensuring a clean and reliable base without distorting the sample.
Sealing sleeves for zone samplers Sealing sleeves for zone samplers

Sealing sleeves for zone samplers

Sealing sleeves for zone samplers provide a reliable means of sealing individual chambers during filling, emptying or transport. In the case of a multi-collector, for example, each chamber can be emptied individually after sampling.
Cleaning brushes Cleaning brushes

Cleaning brushes

Cleaning brushes provide effective and thorough cleaning in a variety of areas. Made from high quality stainless steel and fitted with durable bristles, they effortlessly remove dirt, debris and contaminants from surfaces.

Similar products

Multi-stage sampler multi-sampler 316L (1.4404)/PTFE Multi-stage sampler multi-sampler 316L (1.4404)/PTFE

Multi-stage sampler multi-sampler 316L (1.4404)/PTFE

The multi-sampler with separate collection chambers is a sampler for simultaneous sampling of multiple target points from different areas or layers of bulk solids. It combines the advantages of rugged and inert stainless steel with the light weight of PTFE.
Multi-stage sampler multi-sampler, aluminium Multi-stage sampler multi-sampler, aluminium

Multi-stage sampler multi-sampler, aluminium

The multi-sampler with separate collection chambers is a sampler for simultaneous collection of multiple target point samples from different zones or layers of bulk material. Aluminium is very light, making it easy to handle and transport.
Spiralus zone collector Spiralus zone collector

Spiralus zone collector

The Spiralus zone sampler enables zone-precise sampling of coarse-grained bulk materials. The spiral opening of the slots allows accurate sampling layer by layer. Ideal for grains and pellets.
Aluminium all-layer sampler Aluminium all-layer sampler

Aluminium all-layer sampler

The all-layer sampler with open inner tube is the ideal sampler for taking all-layer or mixed samples from all types of bulk materials, from the finest powders to larger grains.
All-layer sampler 316L (1.4404) All-layer sampler 316L (1.4404)

All-layer sampler 316L (1.4404)

The all-layer sampler with open inner tube is the ideal sampler for taking all-layer or mixed samples from all types of bulk materials, from the finest powders to larger grains.
Uno sampler target point collector Uno sampler target point collector

Uno sampler target point collector

The Uno sampler with single collection chamber is designed to take a target point sample from bulk material. After sampling, the target point sample can be analysed individually or multiple target point samples can be taken and a composite sample prepared.
Jumbo sampler zone sampler for larger volumes, Multi Jumbo sampler zone sampler for larger volumes, Multi

Jumbo sampler zone sampler for larger volumes, Multi

The Multi jumbo sampler separates sample material using separators, allowing multiple point samples to be taken from different layers of a bulk material. These can be analysed specifically or combined to form a mixed sample. Autoclavable and flame retardant for minimal risk of contamination.
Jumbo sampler - zone sampler for larger volumes, all-layer design Jumbo sampler - zone sampler for larger volumes, all-layer design

Jumbo sampler - zone sampler for larger volumes, all-layer design

Thanks to its open inner tube with no separate chambers, the all-layer Jumbo sampler ensures a homogeneous mixed sample that accurately reflects the overall composition of the material, even with heterogeneous materials.