View in the flip catalogue
To all specifications

Packaging unit

Piece

Detailed information

Thanks to its open inner tube with no separate chambers, the Jumbo all-layer collector ensures a homogeneous mixed sample that accurately reflects the overall composition of the material, even in heterogeneous materials.

The open inner tube allows easy cleaning and the tip is removable. The sample is simply emptied through the open handle.

The zone sampler is easily autoclaved and flamed, minimising the risk of sample contamination.

The Jumbo zone sampler is used for sampling through all layers, particularly of coarse-grained bulk materials. The long sampling lances with 50 mm tube diameter and the extra large chamber volume allow large quantities of samples to be taken with large grain sizes.

This zone sampler ensures representative sampling through all layers or zones of the sample material and is essential for accurate analysis and quality control in various industries.

With lances that can be used both vertically and horizontally, this sampler offers maximum flexibility when sampling from different types of bins, silos or piles.

Typical application area of the product

The Jumbo sampler is widely used in various industries where it is important to take representative samples from different layers or areas of a material with a large particle size.

This is particularly important in quality control and quality management in industry, especially in the food, pharmaceutical, chemical and building materials industries, to check compliance with quality standards. In research and development to analyse the composition, properties or impurities of a material. In raw material extraction and processing to assess the quality and composition of a material.

A representative sample is essential for accurate test results.
How to use the product
  1. Turn the handle of the all-layer sampler clockwise, it is now closed and can be inserted into the powder/granulate.
  2. At the desired depth, turn the handle of the collector counterclockwise, the collection chambers are opened and filled with sample.
  3. By turning the handle clockwise again, the collector is closed again and can be removed from the powder/granulate.
  4. Turn the all-layer collector upside down and empty the all-layer sample through the open inner tube into a suitable collecting vessel.
  • Jumbo sampler zone sampler for larger quantities, all-layer

Specifications

General material

Al
Aluminium

General material

1.4301 (AISI 304)
Stainless steel (1.4301), AISI 304

Lance dimensions

Plunge depth:
850 mm
Pipe Ø:
50 mm
Outer Ø:
50 mm
Total length:
950 mm

Sample chamber details

Number of collection openings:
3 St
Sample quantity:
880 ml

Collecting chamber dimensions

Chamber length:
100 mm
Chamber width:
25 mm
Start of the collecting chamber:
123 mm
Distance between the chambers:
180 mm
To the list of chemical resistance
Control seal close-it 95x95 Control seal close-it 95x95

Control seal close-it 95x95

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner.

close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminium/paper) and seals the container hermetically (vapour barrier). This virtually prevents hygroscopic powders from clumping together.

The labels are available in different colours. With printing in red, blue, green, yellow, black or neutral (without printing in white).

close-it can be written on with ball-point pen, pencil or felt-tip marker.

The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.
Control seal close-it maxi 150x150 Control seal close-it maxi 150x150

Control seal close-it maxi 150x150

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner.

close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminium/paper) and seals the container hermetically (vapour barrier). This virtually prevents hygroscopic powders from clumping together.

The labels are available in different colours. With printing in red, blue, green, yellow, black or neutral (without printing in white).

close-it can be written on with ball-point pen, pencil or felt-tip marker.

The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.
Closure seal close-it food & pharma 95x95 Closure seal close-it food & pharma 95x95

Closure seal close-it food & pharma 95x95

In response to many requests from our customers, we have developed close-it food & pharma, a closure seal with an adhesive approved for foodstuffs. The adhesive strength of the adhesive is almost the same as the original, the tried and tested close-it from Bürkle. close-it food & pharma also prevents bulk goods from trickling out after sampling.

The adhesive complies with European food directives. Like the original, close-it food & pharma has an aluminium foil barrier layer. This makes close-it food & pharma suitable for sampling foodstuffs, pharmaceuticals, cosmetics, food supplements, even frozen goods - in short, anywhere where special purity is required.
Closure seal close-it food & pharma Maxi 150x150 Closure seal close-it food & pharma Maxi 150x150

Closure seal close-it food & pharma Maxi 150x150

In response to many requests from our customers, we have developed close-it food & pharma, a closure seal with an adhesive approved for foodstuffs. The adhesive strength of the adhesive is almost the same as the original, the tried and tested close-it from Bürkle. close-it food & pharma also prevents bulk goods from trickling out after sampling.

The adhesive complies with European food directives. Like the original, close-it food & pharma has an aluminium foil barrier layer. This makes close-it food & pharma suitable for sampling foodstuffs, pharmaceuticals, cosmetics, food supplements, even frozen goods - in short, anywhere where special purity is required.
Cleaning brushes

Cleaning brushes

Cleaning brushes provide effective and thorough cleaning in a variety of areas. Made from high quality stainless steel and fitted with durable bristles, they effortlessly remove dirt, debris and contaminants from surfaces.
Quali-Paper for zone collectors Quali-Paper for zone collectors

Quali-Paper for zone collectors

The sample paper is lint and fibre free, ensuring a clean and reliable base without distorting the sample.
Depth stop for sampler

Depth stop for sampler

The depth limiter can be screwed to any height of the sampler using a C-clamp screw. This ensures that the sampler penetrates to the same desired depth each time it is inserted.
Jumbo sampler zone sampler for larger volumes, Multi Jumbo sampler zone sampler for larger volumes, Multi

Jumbo sampler zone sampler for larger volumes, Multi

The Multi jumbo sampler separates sample material using separators, allowing multiple point samples to be taken from different layers of a bulk material. These can be analysed specifically or combined to form a mixed sample. Autoclavable and flame retardant for minimal risk of contamination.
Aluminium all-layer sampler Aluminium all-layer sampler

Aluminium all-layer sampler

The all-layer sampler with open inner tube is the ideal sampler for taking all-layer or mixed samples from all types of bulk materials, from the finest powders to larger grains.
All-layer sampler 316L (1.4404) All-layer sampler 316L (1.4404)

All-layer sampler 316L (1.4404)

The all-layer sampler with open inner tube is the ideal sampler for taking all-layer or mixed samples from all types of bulk materials, from the finest powders to larger grains.
Multi-stage sampler multi-sampler 316L (1.4404) Multi-stage sampler multi-sampler 316L (1.4404)

Multi-stage sampler multi-sampler 316L (1.4404)

The multi sampler with separate collection chambers is a special sampler for the simultaneous sampling of several target points from different zones or layers of bulk materials. The stainless steel multi sampler offers excellent chemical resistance.
Multi-stage sampler multi-sampler 316L (1.4404)/PTFE Multi-stage sampler multi-sampler 316L (1.4404)/PTFE

Multi-stage sampler multi-sampler 316L (1.4404)/PTFE

The multi-sampler with separate collection chambers is a sampler for simultaneous sampling of multiple target points from different areas or layers of bulk solids. It combines the advantages of rugged and inert stainless steel with the light weight of PTFE.
Multi-stage sampler multi-sampler, aluminium Multi-stage sampler multi-sampler, aluminium

Multi-stage sampler multi-sampler, aluminium

The multi-sampler with separate collection chambers is a sampler for simultaneous collection of multiple target point samples from different zones or layers of bulk material. Aluminium is very light, making it easy to handle and transport.
Uno sampler target point collector Uno sampler target point collector

Uno sampler target point collector

The Uno sampler with single collection chamber is designed to take a target point sample from bulk material. After sampling, the target point sample can be analysed individually or multiple target point samples can be taken and a composite sample prepared.