Deutsch
français
español
русский
Stainless steel barrel pump - discharge hose & valve
Filling pump with flexible hose and shut-off valve
- Ideal for highly flammable or aggressive liquids
- Meets the highest safety standards
- Economical and durable
- Flexibility in the positioning of the filling container
Packaging unit
Piece
Please note
Caution! When handling flammable, highly flammable liquids, the explosion protection guidelines must be observed. All parts must be earthed, use anti-static set!
The pump is not suitable for acetone or similar drying solvents.
Detailed information
This stainless steel barrel pump has a flexible discharge hose with stopcock for maximum flexibility when filling liquids.
The 1.2m discharge hose directs the liquid directly into the desired container. This gives you the freedom to place the container in a convenient position regardless of the position of the drum pump. The stopcock controls the flow of liquid, allowing precise dosing and preventing unwanted spillage.
Stainless steel drum pumps are powerful and versatile piston pumps for transferring flammable or aggressive liquids and chemicals.
Their electrical conductivity makes the drum pumps ideal for highly flammable or combustible liquids. They have been specially developed for use in zones 0 and 1 (explosion groups II A and II B) and are DEKRA-tested. When used for flammable media, the pumps must be grounded.
The PTFE seals not only guarantee high chemical resistance, but also excellent sliding properties during the pumping process.
Stainless steel drum pumps are very flexible and versatile. They are ideally suited for a wide variety of drums, containers or other receptacles (approx. 60 to 1000 l capacity, up to 91 cm depth) and are thus true all-rounders in the workshop or production.
Compared to conventional solvent pumps for highly flammable liquids, our stainless steel drum pumps offer excellent value for money.
The durable and robust drum pumps made of high-quality, corrosion-resistant stainless steel (1.4301) guarantee a long service life, especially in humid or aggressive environments.
Typical application area of the product
Stainless steel drum pumps are electrically conductive and resistant to a wide range of chemicals, enabling safe and efficient transfer or metering of liquids in the chemical, pharmaceutical or food industries.
How to use the product
- Screw on the discharge hose.
- Insert the barrel pump with barrel screw connection (accessory) into the barrel and screw in hand-tight.
- Adjust the delivery tube height if necessary.
- Hold the discharge hose in the filling container.
- Open the stopcock on the discharge hose.
- Operate the piston rod with the handle and fill the liquid.
- On the last pump stroke, push the piston rod into the pump as far as it will go.
- Close the stopcock on the discharge hose.
- Unscrew the discharge hose.
- Carefully unscrew the pump from the drum.
- Rinse the drum pump with pH-neutral liquid.
- Stainless steel barrel pump
- Discharge hose & valve
Specifications
General material
1.4301 (AISI 304)
Stainless steel (1.4301), AISI 304
Further materials
PTFE
Polytetrafluoroethylene
Connection
- For openings from:
- 32 mm
- Connection type:
- Barrel screw joint
Throughput
- Conveying capacity:
- 190 ml/stroke
- Delivery rate min.:
- 9 l/min
- Max. delivery rate:
- 22 l/min
Limit values
- Viscosity up to:
- 500 mPa*s
Ø
- Immersion tube Ø:
- 32 mm
Colouring
- Colour:
- silver
Pump outlet
- Outer outlet Ø:
- 12.8 mm
- Outlet hose length:
- 1.2 m
- Outlet type:
- Discharge hose
Delivery tube
- Immersion depth max.:
- 36 cm
You need
Complementary products
Anti-static set
When decanting flammable liquids without the machines and containers involved in the process being sufficiently earthed, electrostatic build-up can occur, which for many substances can result in fire or an explosion.
Bürkle’s Anti-static set ensures easy and reliable earthing.
The Anti-static set consists of three colour-coded connecting copper cables with clamps in a handy plastic case.
Brass barrel screw joint
Barrel screw joint made of nickel-plated brass for barrel pump stainless steel. Prevents electro-static charge in combination with the Anti-static set. For the safe transfer of flammable and easily flammable liquids. For containers with R 2" steel fine thread inside.
The container connectors make decanting even easier and safer with their more secure connection to barrels.
Discharge hose 1.2 m with stopcock
Discharge tube, single, thread G 3/4"
Gastight barrel connector
The gas tight barrel screw joint prevents hazardous gases from escaping from the barrel. G2" steel barrel thread, non-return valve with connection 1/8". Nickel-plated brass, seals made of FKM.
The container connectors make decanting even easier and safer with their more secure connection to barrels.
PP barrel screw joint
Barrel screw joint made of PP for secure connection in the barrel in three different thread models. For drawing off liquids that are not flammable.
The container connectors make decanting even easier and safer with their more secure connection to barrels. The connectors secure the pump in the barrel, enable a vertical position change and allow the required air exchange.
PVC barrel plug
Barrel bungs made of PVC, consisting of two parts, therefore can be used for various openings with a diameter from 40–70 mm.
Universal thread adapter
Universal thread adapter for nearly all drums and other containers with opening of 48–75 mm in diameter, regardless of the respective thread. The thread adapter can be mounted quickly and easily with clamping screws and can be used for different container openings.
With G2" connector thread for Bürkle drum screw connections and pumps with immersion tube diameter up to 32 mm.
Drain safety stand
Drum holder
Universal drum wrench
Similar products
Barrel pump stainless steel - discharge elbow
Solvent pump hand operated, for tin-foil canisters
The solvent pump for tinplate canisters with pull-out spout puts an end to the risky decanting of dangerous substances into another container. The included thread adapter fits to the standard pull-out spouts - immediate safety!
Solvent pump hand operated, for tin-foil canisters
The solvent pump for tinplate canisters with pull-out spout puts an end to the risky decanting of dangerous substances into another container. The included thread adapter fits to the standard pull-out spouts - immediate safety!
Solvent pump foot operated - discharge tube
Barrel pump for solvents with rigid discharge tube.
Solvent pump foot operated - discharge hose/stopcock
Barrel pump for solvents with discharge hose and stopcock made of stainless steel/PTFE.
