View in the flip catalogue
To all specifications

Packaging unit

Piece

Detailed information

PE MiniSampler for general sampling, max. suction height 5 m*

Ideal for general sampling from barrels, canisters, tanks etc.

With the vacuum sampler MiniSampler, the sample liquid only comes into contact with the suction hose and the original sample bottle. The possibility of cross-contamination is greatly reduced. Immediately after taking the sample, the bottles are sealed. The disposable suction hose can quickly be replaced. This guarantees that the samples are never contaminated. If necessary, a new hose can be used for every single sample.

Due to its small diameter (8 mm), the hose can reach narrow, seemingly inaccessible sampling areas.

Typical application area of the product

The MiniSampler sampling pump is ideal for sampling from deep or narrow sampling points.
How to use the product
  1. Insert the hose and the bottle into the pump.
  2. Insert hose end to desired sample depth.
  3. Move the pump piston back and forth and collect the sample. The liquid flows directly into the bottle.
  4. Take off the filled bottle, close and label it.
  • Transport case
  • Vacuum pump
  • 10x PE 100 ml bottles
  • 10 m PE suction hose 6 x 8 mm
  • Hose cutter
  • Stainless steel hose weight made of V2A (1.4301), nickel-plated brass
  • 20x seal-it label seals

Specifications

General material

PE
Polyethylene

General material

1.4301 (AISI 304)
Stainless steel (1.4301), AISI 304

General material

MS
Brass

Further materials

PP
Polypropylene

Contents of collection container

Contents:
100 ml

Tubing length

Hose length:
10 m

Dimensions

Length:
402 mm
Width:
335 mm
Height:
97 mm

Gewinde

Thread:
GL 32
Version:
Internal thread

Limit values

Intake height:
5 m/WS
To the list of chemical resistance
MiniSampler pump with adapter PP

MiniSampler pump with adapter PP

MiniSampler standard pump

MiniSampler standard pump

MiniSampler adapter PTFE

MiniSampler adapter PTFE

Hose cutter

Hose cutter

Edges cut with the hose cutter are always clean and flat, even in the case of thick hoses. For hoses to Ø 20 mm.
Narrow neck reagent bottles Narrow neck reagent bottles

Narrow neck reagent bottles

Narrow neck reagent bottles for storing, packaging, sampling or transporting liquids. Transparent HDPE allows the contents to be seen. Blue tamper evident PP screw cap ensures leak proof storage.
Narrow neck reagent bottles Narrow neck reagent bottles

Narrow neck reagent bottles

Narrow neck reagent bottles for storing, packaging, sampling or transporting liquids. Transparent HDPE allows the contents to be seen. Blue tamper evident PP screw cap ensures leak proof storage.
PE hose PE hose

PE hose

The PE hose is physiologically harmless, resistant to acids, alkalis, salts and a variety of solvents, pressure-resistant, flexible, impact-resistant, lightweight, pressure-resistant, deformation-resistant up to + 80°C.
PE hose PE hose

PE hose

The PE hose is physiologically harmless, resistant to acids, alkalis, salts and a variety of solvents, pressure-resistant, flexible, impact-resistant, lightweight, pressure-resistant, deformation-resistant up to + 80°C.
MiniSampler PTFE MiniSampler PTFE

MiniSampler PTFE

PTFE MiniSampler for ultra-pure sampling, max. suction height 5 m*

Ideal when maximum purity is needed.