View in the flip catalogue
To all specifications

Packaging unit

Piece

Please note

Pay attention to the chemical resistance of the materials! See also List of chemical resistance

Caution! When handling flammable, highly flammable liquids, the explosion protection guidelines must be observed. All parts must be earthed, use anti-static set!

Detailed information

ProfiSampler aluminium for solvents and flammable liquids in Explosion Categories IIA, IIB and IIC. With bottle thread GL 45 (suitable for Schott glass bottles 100 ml to 1000 ml).

When taking samples of flammable liquids, the device must be earthed. For this, earthing cable and, possibly in addition, anti-static set should be used, see accessories.

While the MiniSampler is designed for laboratory use, the ProfiSampler has been specially developed for rough industrial use.

Vacuum samplers have the advantage that the sample liquid only comes into contact with the suction hose and the original sample bottle. The possibility of cross-contamination is greatly reduced. Immediately after taking the sample, the bottles are sealed. The disposable suction hose can quickly be replaced. This guarantees that the samples are always authentic. If necessary, a new hose can be used for every single sample.

Due to its small diameter (8 mm), the hose can reach narrow, seemingly inaccessible sampling areas.

Typical application area of the product

Sampling liquids in barrels, tanks, lorries, railway goods wagons, ships, water courses, ground water, etc.
5305-1100_profisampler_aluminium_gebrauchsanleitung.pdf 5305-1100_profisampler_aluminium_gebrauchsanleitung.pdf
  • Vacuum pump made of aluminium, with feet, venting valve and bottle thread GL 45
  • Glass bottle 500 ml
  • 5 suction tubes PA black (220 cm long, electrically conductive)
  • Hose cutter
  • Brass hose weight
  • 20x seal-it bottle seal
  • Earthing cable

Specifications

General material

GL
Glass

General material

PA
Polyamide

General material

MS
Brass

Further materials

Al
Aluminium

Further materials

EPDM
Ethylene propylene diene monomer rubber

Gewinde

Thread:
GL 45
Version:
Internal thread

Tubing length

Hose length:
220 cm

Contents of collection container

Contents:
500 ml

Limit values

Intake height:
5 mWC

Vacuum sampler

Special features Vacuum sampler:
Can be used for flammable liquids
To the list of chemical resistance

The ProfiSampler can be extended with useful accessories developed in practice.

Complementary products

Glass sample bottles Glass sample bottles

Glass sample bottles

Glass sample bottles with blue cap and ring, PP, easy to read scale, large labelling area. Pouring ring for clean working. Ideal for storage and transport of substances.
PE hose PE hose

PE hose

The PE hose is physiologically harmless, resistant to acids, alkalis, salts and a variety of solvents, pressure-resistant, flexible, impact-resistant, lightweight, pressure-resistant, deformation-resistant up to + 80°C.
PTFE hose PTFE hose

PTFE hose

PTFE hoses have outstanding properties, they are resistant to almost all chemicals, have the lowest coefficient of friction of all polymers and excellent non-stick/residual emptying properties. PTFE hoses do not smell, burn or smoke and are resistant to ageing and UV radiation.

Straight suction tubes for ProfiSampler

Straight suction tubes (PE or PA) have the advantage that they are not slightly bent as is the standard tubing (from the roll) and can therefore be immersed absolutely vertically into the container. The suction tubes are available in transparent PE for general sampling and black PA for flammable liquids in VbF Hazard Category AI (electrically conducting). Diameter 6 x 8 mm.

Contamination banned! In practice the low-priced tubes are only used once. They are then disposed of, instead of being subjected to a costly cleaning process. The tubes are not autoclavable.
Transport case for straight suction tubes

Transport case for straight suction tubes

Suction tube case for the practical transport of new suction tubes and the safe storage of used ones. Suitable for 100 suction tubes, 220 cm long.
Anti-static set Anti-static set

Anti-static set

When decanting flammable liquids without the machines and containers involved in the process being sufficiently earthed, electrostatic build-up can occur, which for many substances can result in fire or an explosion.

Bürkle’s Anti-static set ensures easy and reliable earthing.

The Anti-static set consists of three colour-coded connecting copper cables with clamps in a handy plastic case.

Similar products

Profi Sampler PP Profi Sampler PP

Profi Sampler PP

ProfiSampler PP for general samples, for weak acids, alkalis, detergents, chemical baths. Made of solid, chemical resistant Polypopylene.
Sampler for liquid samples UniSampler "Ex" Sampler for liquid samples UniSampler "Ex"

Sampler for liquid samples UniSampler "Ex"

The sampler was specially developed for sampling flammable liquids of hazard class AI (VbF, e.g. petrol). The glass bottle and hose are electrically connected and are earthed via an earth cable.
UniSampler with suction lance UniSampler with suction lance

UniSampler with suction lance

The collection lance consists of an inner tube and an outer tube. The suction position can be varied steplessly with the outer tube within a height of 0 to 48 cm. The total length of the telescopic suction tube is 100 cm.
UniSampler with hose UniSampler with hose

UniSampler with hose

UniSampler with PVC hose and hose weight made of stainless steel. For deep, hard-to-reach places. The mass of the metal tube drags the hose to any depth.
Vampire sample collector Vampire sample collector

Vampire sample collector

The Vampire sampler makes it easy to collect liquids from great depths. The medium to be sampled is fed directly into the sample container via the closed tubing system. Impurities and contamination are eliminated.
MiniSampler PE MiniSampler PE

MiniSampler PE

PE MiniSampler for general sampling, max. suction height 5 m*

Ideal for general sampling from barrels, canisters, tanks etc.
MiniSampler PTFE MiniSampler PTFE

MiniSampler PTFE

PTFE MiniSampler for ultra-pure sampling, max. suction height 5 m*

Ideal when maximum purity is needed.