View in the flip catalogue
To all specifications

Packaging unit

Piece

Please note

Please order the desired head as an accessory!

Detailed information

The MicroSampler has especially been designed for the sampling of small quantities of powder.

Volumes of 0.2 ml, 0.5 ml, 1.0 ml, 2.0 ml, 5.0 ml and 10 ml can be sampled easily, quickly and cleanly from different sampling depths from sacks or containers.

The tips of the MicroSampler are interchangeable. This means that tips with different volumes can be used.

Typical application area of the product

The MicroSampler has especially been designed for the sampling of small quantities of powder.
How to use the product

Use

  1. Insert MicroSampler into powder.
  2. At the predetermined point, open the volume tip by pressing the button, the sample flows in.
  3. Close the volume tip, the sample is collected.
  4. Pull back the lance, open the volume tip again, empty the sample.
zer12_v25_en_ex_vxa.pdf zer12_v25_en_ex_vxa.pdf
5307-xxxx_microsampler_gebrauchsanleitung.pdf 5307-xxxx_microsampler_gebrauchsanleitung.pdf

Specifications

General material

1.4404 (316L)
Stainless steel 1.4404, AISI 316L

Further materials

PA
Polyamide

Further materials

1.4310
Stainless steel 1.4310 (spring steel), AISI 301

Collector dimensions

Outer Ø:
12 mm
Plunge depth:
550 mm
Total length:
652 mm

Lance for collection volume

For collection volumes of:
0.2 ml
For collection volumes up to:
1 ml
To the list of chemical resistance

You need

The following accessories are required to use the product

You need

MicroSampler tips for samples 0.2 - 1.0 ml

Necessary accessories

Similar products

MicroSampler powder sampler for samples 2.0 - 10 ml MicroSampler powder sampler for samples 2.0 - 10 ml

MicroSampler powder sampler for samples 2.0 - 10 ml

The MicroSampler has especially been designed for the sampling of small quantities of powder.

Volumes of 0.2 ml, 0.5 ml, 1.0 ml, 2.0 ml, 5.0 ml and 10 ml can be sampled easily, quickly and cleanly from different sampling depths from sacks or containers.

The tips of the MicroSampler are interchangeable. This means that tips with different volumes can be used.
PharmaPicker for samples 0.1 - 1.2 ml PharmaPicker for samples 0.1 - 1.2 ml

PharmaPicker for samples 0.1 - 1.2 ml

For sampling very small quantities of highly potent, expensive or active powders for analysis. The smallest sample quantities from 0.1 ml to 2.5 ml can be collected with the PharmaPicker. By simply exchanging the volume tip in the collection cylinder for 0.1–1.2 ml or 1.25–2.5 ml, the sampling volume is modified.

The PharmaPicker has a length of 60 cm and can be extended repeatedly by 50 cm or 100 cm, maximum length 3.50 m.
PharmaPicker for samples 1.25 - 2.5 ml PharmaPicker for samples 1.25 - 2.5 ml

PharmaPicker for samples 1.25 - 2.5 ml

For sampling very small quantities of highly potent, expensive or active powders for analysis. The smallest sample quantities from 0.1 ml to 2.5 ml can be collected with the PharmaPicker. By simply exchanging the volume tip in the collection cylinder for 0.1–1.2 ml or 1.25–2.5 ml, the sampling volume is modified.

The PharmaPicker has a length of 60 cm and can be extended repeatedly by 50 cm or 100 cm, maximum length 3.50 m.
Powder sampler Mini Powder sampler Mini

Powder sampler Mini

The Mini powder sampler is a small volume stainless steel sampler. When the button is pressed, a sample rod is inserted into the sample material and withdrawn when the button is released. A fixed amount of sample is trapped in the sample notch of the rod and removed.
Disposable powder sampler PharmaDispo Disposable powder sampler PharmaDispo

Disposable powder sampler PharmaDispo

Bürkle's PharmaDispo disposable powder sampler is a world first - it is the first disposable multi-target sampler that takes three separate target point samples with a single sampling. It is manufactured, assembled and individually packaged under class 7 (ISO) clean room conditions.
Disposable powder sampler PharmaDispo, sterile Disposable powder sampler PharmaDispo, sterile

Disposable powder sampler PharmaDispo, sterile

Bürkle's PharmaDispo disposable powder sampler is a world first - it is the first disposable multi-target sampler that takes three separate target point samples with a single sampling. Manufactured under class 7 (ISO) clean room conditions, assembled, individually packaged and sterilised.
StickProof StickProof

StickProof

Sampler for powder in the pharma area, made of stainless steel AISI 316L, material 1.4404. The especially slender tip can be inserted easily and deeply in order to take the sample. The conical inlet of the tip allows the collection of either very small or larger quantities. StickProof is constructed in one piece without edges, grooves or crevices for perfect and easy cleaning. The sample can be filled directly into the sampling bag from the outlet end. Fasten the bag with a sturdy clamp.
PharmaSpoon PharmaSpoon

PharmaSpoon

PharmaSpoon for taking samples of powdery substances, intermediate products and material in the pharmaceutical industry. Special materials with excellent surface qualities must be used for this to prevent cross-contamination. Our PharmaSpoon fulfils these requirements. Made of stainless steel AISI 316L (1.4404), surface highly polished by hand (not electro-polished!). The excellent surface properties of the PharmaSpoon provide significant advantages.
Novartos Multi pharmaceutical zone sampler 2-compartment sampler Novartos Multi pharmaceutical zone sampler 2-compartment sampler

Novartos Multi pharmaceutical zone sampler 2-compartment sampler

The Novartos Multi double sampler allows a double multi-point sample to be taken from several pre-defined sampling zones. Depending on the length, four, seven or nine sampling chambers are equipped with two sample inserts (accessories) each.
Novartos Multi pharmaceutical zone sampler 3-compartment sampler Novartos Multi pharmaceutical zone sampler 3-compartment sampler

Novartos Multi pharmaceutical zone sampler 3-compartment sampler

The Novartos Multi 3-compartment sampler takes a triple multipoint sample from several pre-defined sampling zones. Depending on the length, four, seven or nine collection chambers are equipped with three sample inserts (accessories) each for the triple sampler.
Novartos Uno pharmaceutical zone sampler 2-compartment sampler Novartos Uno pharmaceutical zone sampler 2-compartment sampler

Novartos Uno pharmaceutical zone sampler 2-compartment sampler

With the Novartos Uno 2-compartment sampler, a double target point sample can be taken from a predefined sampling area. A collection chamber is equipped with two sample inserts (accessories) for the double sampler.
Pharmaceutical zone collector Novartos Uno 3-sample train Pharmaceutical zone collector Novartos Uno 3-sample train

Pharmaceutical zone collector Novartos Uno 3-sample train

The Novartos Uno triple sampler takes a triple target point sample from a predefined sampling area. For the triple sampler, a collection chamber is equipped with three sample inserts (accessories).