Barrel pump stainless steel - discharge elbow
Drum pump for precise dispensing of flammable liquids
- Ideal for highly flammable or aggressive liquids
- Meets the highest safety standards
- Economical and durable
- For precise and safe filling
Packaging unit
Piece
Please note
Caution! When handling flammable, highly flammable liquids, the explosion protection guidelines must be observed. All parts must be earthed, use anti-static set!
The pump is not suitable for acetone or similar drying solvents.
Detailed information
This stainless steel barrel pump has a fixed discharge elbow for accurate and safe filling of liquids. The robust stainless steel discharge elbow directs the liquid in a targeted and controlled manner, preventing spillage and splashing.
For use in demanding environments, the stainless steel barrel pump with discharge elbow is extra durable and easy to clean.
Stainless steel drum pumps are powerful and versatile piston pumps for transferring flammable or aggressive liquids and chemicals.
Their electrical conductivity makes the drum pumps ideal for highly flammable or combustible liquids. They have been specially developed for use in zones 0 and 1 (explosion groups II A and II B) and are DEKRA-tested. When used for flammable media, the pumps must be grounded.
The PTFE seals not only guarantee high chemical resistance, but also excellent sliding properties during the pumping process.
Stainless steel drum pumps are very flexible and versatile. They are ideally suited for a wide variety of drums, containers or other receptacles (approx. 60 to 1000 l capacity, up to 91 cm depth) and are thus true all-rounders in the workshop or production.
Compared to conventional solvent pumps for highly flammable liquids, our stainless steel drum pumps offer excellent value for money.
The durable and robust drum pumps made of high-quality, corrosion-resistant stainless steel (1.4301) guarantee a long service life, especially in humid or aggressive environments.
Typical application area of the product
Stainless steel drum pumps are electrically conductive and resistant to a wide range of chemicals, enabling safe and efficient transfer or metering of liquids in the chemical, pharmaceutical or food industries.
How to use the product
- Screw on the discharge elbow.
- Insert the barrel pump with barrel screw fitting (accessory) into the barrel and screw in hand-tight.
- If necessary, adjust the height of the riser tube.
- Place the filling container under the discharge bend.
- Pull the cap off the discharge bend.
- Operate the piston rod with the handle and fill the liquid.
- During the last pump stroke, push the piston rod into the pump as far as it will go.
- Carefully unscrew the pump from the barrel.
- Rinse the barrel pump with pH-neutral liquid.
- Stainless steel barrel pump
- Discharge elbow
Specifications
General material
1.4301 (AISI 304)
Stainless steel (1.4301), AISI 304
Further materials
PTFE
Polytetrafluoroethylene
Delivery tube
- Immersion depth max.:
- 36 cm
Throughput
- Conveying capacity:
- 190 ml/stroke
- Delivery rate min.:
- 9 l/min
- Max. delivery rate:
- 22 l/min
Ø
- Immersion tube Ø:
- 32 mm
Colouring
- Colour:
- silver
Connection
- Connection type:
- Barrel screw joint
- For openings from:
- 32 mm
Limit values
- Viscosity up to:
- 500 mPa*s
Pump outlet
- Outlet type:
- Discharge tube
- Length of discharge tube:
- 290 mm
- Outer outlet Ø:
- 12 mm
Anti-static set
When decanting flammable liquids without the machines and containers involved in the process being sufficiently earthed, electrostatic build-up can occur, which for many substances can result in fire or an explosion.
Bürkle’s Anti-static set ensures easy and reliable earthing.
The Anti-static set consists of three colour-coded connecting copper cables with clamps in a handy plastic case.
Brass barrel screw joint
Barrel screw joint made of nickel-plated brass for barrel pump stainless steel. Prevents electro-static charge in combination with the Anti-static set. For the safe transfer of flammable and easily flammable liquids. For containers with R 2" steel fine thread inside.
The container connectors make decanting even easier and safer with their more secure connection to barrels.
Discharge hose 1.2 m with stopcock
Discharge tube, single, thread G 3/4"
Gastight barrel connector
The gas tight barrel screw joint prevents hazardous gases from escaping from the barrel. G2" steel barrel thread, non-return valve with connection 1/8". Nickel-plated brass, seals made of FKM.
The container connectors make decanting even easier and safer with their more secure connection to barrels.
PP barrel screw joint
Barrel screw joint made of PP for secure connection in the barrel in three different thread models. For drawing off liquids that are not flammable.
The container connectors make decanting even easier and safer with their more secure connection to barrels. The connectors secure the pump in the barrel, enable a vertical position change and allow the required air exchange.
PVC barrel plug
Barrel bungs made of PVC, consisting of two parts, therefore can be used for various openings with a diameter from 40–70 mm.
Universal thread adapter
Universal thread adapter for nearly all drums and other containers with opening of 48–75 mm in diameter, regardless of the respective thread. The thread adapter can be mounted quickly and easily with clamping screws and can be used for different container openings.
With G2" connector thread for Bürkle drum screw connections and pumps with immersion tube diameter up to 32 mm.