Deutsch
English
français
español
русский
italiano
Türkçe
中文
MiniSampler PE
Sampling - convenient, quick, clean, practical
- Also suitable for viscous oils
- Complete in a handy transport case
bk.product.packaging-unit.label
Piece
Detailed information
PE MiniSampler for general sampling, max. suction height 5 m*
Ideal for general sampling from barrels, canisters, tanks etc.
With the vacuum sampler MiniSampler, the sample liquid only comes into contact with the suction hose and the original sample bottle. The possibility of cross-contamination is greatly reduced. Immediately after taking the sample, the bottles are sealed. The disposable suction hose can quickly be replaced. This guarantees that the samples are never contaminated. If necessary, a new hose can be used for every single sample.
Due to its small diameter (8 mm (0.31 in.)), the hose can reach narrow, seemingly inaccessible sampling areas.
bk.product.scope_of_application.tab_headline
The MiniSampler sampling pump is ideal for sampling from deep or narrow sampling points.
bk.product.utilization.tab_headline
- Insert the hose and the bottle into the pump.
- Insert hose end to desired sample depth.
- Move the pump piston back and forth and collect the sample. The liquid flows directly into the bottle.
- Take off the filled bottle, close and label it.
- Transport case
- Vacuum pump
- 10x PE 100 ml bottles
- 10 m PE suction hose 6 x 8 mm
- Hose cutter
- Stainless steel hose weight made of V2A (1.4301), nickel-plated brass
- 20x seal-it label seals
bk.product.specifications.title
bk.product.general_material.label
PE
Polyethylene
bk.product.general_material.label
1.4301 (AISI 304)
Stainless steel (1.4301), AISI 304
bk.product.general_material.label
MS
Brass
bk.product.detail_material.label
PP
Polypropylene
Gewinde
- Gewinde:
- GL 32
- Gewindeausführung:
- Internal thread
Tubing length
- Länge Schlauch:
- 10 m
Contents of collection container
- Inhalt:
- 100 ml
Limit values
- Ansaughöhe ca.:
- 5 mWC
Dimensions
- Länge:
- 402 mm
- Breite:
- 335 mm
- Höhe:
- 97 mm
Vacuum sampler
- Probenahmeart:
- Target point sample
- Proben Material:
- liquid,viscous/light viscosity
- Besondere Eigenschaften Vakuum-Probenehmer:
- Completely transportable in a case
bk.product.optional_accessories.tab_title
Narrow neck reagent bottles
Narrow neck reagent bottles
PE hose
Hose cutter
Edges cut with the hose cutter are always clean and flat, even in the case of thick hoses. For hoses to Ø 20 mm (0.79 in.).
MiniSampler adapter PTFE
MiniSampler pump with adapter PP
MiniSampler standard pump
bk.product.similar_products.tab_title
MiniSampler PTFE
PTFE MiniSampler for ultra-pure sampling, max. suction height 5 m* (16.40 ft.*)
Ideal when maximum purity is needed.
UniSampler with suction lance
The collection lance consists of an inner tube and an outer tube. The suction position can be varied steplessly with the outer tube within a height of 0 to 48 cm (0 to 18.90 in.). The total length of the telescopic suction tube is 100 cm (39.37 in.).
UniSampler with hose
UniSampler with PVC hose and hose weight made of stainless steel. For deep, hard-to-reach places. The mass of the metal tube drags the hose to any depth.
ProfiSampler Aluminium
ProfiSampler aluminum for solvents and flammable liquids in Explosion Categories IIA, IIB and IIC. With bottle thread GL 45 (suitable for Schott glass bottles 100 ml (3.38 oz.) to 1000 ml (33.81 oz.)).
When taking samples of flammable liquids, the device must be grounded. For this, grounding cable and, possibly in addition, anti-static set should be used, see accessories.
Profi Sampler PP
ProfiSampler PP for general samples, for weak acids, alkalis, detergents, chemical baths. Made of solid, chemical resistant Polypopylene.
Sampler for liquid samples UniSampler "Ex"
The sampler was specially developed for sampling flammable liquids of hazard class AI (VbF, e.g. petrol). The glass bottle and hose are electrically connected and earthed via an earth cable.
