Deutsch
English
français
español
русский
italiano
Türkçe
中文
Profi Sampler PP
- Three feet guarantee that the ProfiSampler stands safely
- Fill level control, automatic return flow and overfill protection through built-in venting valve
- Available with suction hose in PE, PA and PTFE wherever the highest degree of purity is required
- Can be supplied with straight suction tubes for simpler sampling, incl. transport case for tidy transport and disposal of the suction tubes
- Suction volume 200 ml (6.76 oz.), suction pressure 0.5 bar (7.25 psi)
- Suction height from liquid surface 5 m (16.40 ft.) WS
- Sample bottles available in different materials and sizes
bk.product.packaging-unit.label
Piece
bk.product.warnings.headline
Pay attention to the chemical resistance of the materials! See also "List of chemical resistance"
Detailed information
ProfiSampler PP for general samples, for weak acids, alkalis, detergents, chemical baths. Made of solid, chemical resistant Polypopylene.
While the MiniSampler is designed for laboratory use, the ProfiSampler has been specially developed for rough industrial use.
Vacuum samplers have the advantage that the sample liquid only comes into contact with the suction hose and the original sample bottle. The possibility of cross-contamination is greatly reduced. Immediately after taking the sample, the bottles are sealed. The disposable suction hose can quickly be replaced. This guarantees that the samples are always authentic. If necessary, a new hose can be used for every single sample.
Due to its small diameter (8 mm (0.31 in.)), the hose can reach narrow, seemingly inaccessible sampling areas.
bk.product.scope_of_application.tab_headline
Sampling liquids in barrels, tanks, trucks, railway goods cars, ships, water courses, ground water, etc.
- Vacuum pump, made of solid PP, with feet, venting valve and bottle thread GL 40,
- PP bottle 250 ml (8.45 oz.)
- 10 m (32.81 ft.) PE suction hose (roll)
- Hose cutter
- Stainless steel hose weight made of AISI 304 (1.4301)
- 20x seal-it bottle seal
bk.product.specifications.title
bk.product.general_material.label
PP
Polypropylene
bk.product.general_material.label
PE
Polyethylene
bk.product.general_material.label
1.4301 (AISI 304)
Stainless steel (1.4301), AISI 304
bk.product.general_material.label
MS
Brass
bk.product.detail_material.label
FKM, FPM
Fluorine rubber
Gewinde
- Gewinde:
- GL 40
- Gewindeausführung:
- Internal thread
Tubing length
- Länge Schlauch:
- 10 m
Contents of collection container
- Inhalt:
- 250 ml
Limit values
- Ansaughöhe ca.:
- 5 mWC
Vacuum sampler
- Probenahmeart:
- Target point sample
- Proben Material:
- liquid
The ProfiSampler can be extended with useful accessories developed in practice.
bk.product.optional_accessories.tab_title
PP sampling bottle
PE hose
Straight suction tubes for ProfiSampler
Straight suction tubes (PE or PA) have the advantage that they are not slightly bent as is the standard tubing (from the roll) and can therefore be immersed absolutely vertically into the container. The suction tubes are available in transparent PE for general sampling and black PA for flammable liquids in VbF Hazard Category AI (electrically conducting). Diameter 6 x 8 mm (0.24 x 0.31 in.).
Contamination banned! In practice the low-priced tubes are only used once. They are then disposed of, instead of being subjected to a costly cleaning process. The tubes are not autoclavable.
bk.product.similar_products.tab_title
ProfiSampler Aluminium
ProfiSampler aluminum for solvents and flammable liquids in Explosion Categories IIA, IIB and IIC. With bottle thread GL 45 (suitable for Schott glass bottles 100 ml (3.38 oz.) to 1000 ml (33.81 oz.)).
When taking samples of flammable liquids, the device must be grounded. For this, grounding cable and, possibly in addition, anti-static set should be used, see accessories.
Vampire sample collector
Sampler for liquid samples UniSampler "Ex"
The sampler was specially developed for sampling flammable liquids of hazard class AI (VbF, e.g. petrol). The glass bottle and hose are electrically connected and earthed via an earth cable.
UniSampler with suction lance
The collection lance consists of an inner tube and an outer tube. The suction position can be varied steplessly with the outer tube within a height of 0 to 48 cm (0 to 18.90 in.). The total length of the telescopic suction tube is 100 cm (39.37 in.).
UniSampler with hose
UniSampler with PVC hose and hose weight made of stainless steel. For deep, hard-to-reach places. The mass of the metal tube drags the hose to any depth.
MiniSampler PE
PE MiniSampler for general sampling, max. suction height 5 m*
Ideal for general sampling from barrels, canisters, tanks etc.
MiniSampler PTFE
PTFE MiniSampler for ultra-pure sampling, max. suction height 5 m* (16.40 ft.*)
Ideal when maximum purity is needed.