Deutsch
français
español
русский
ViscoSampler PTFE/FEP
Packaging unit
Piece
Detailed information
ViscoSampler with powerful suction for viscous media. The media is drawn up and discharged using the suction flask. Made of ultra-pure, chemically inert PTFE/FEP for contamination-free sampling.
Easy cleaning - all surfaces are poreless and without crevices. Dirt accumulation is prevented. Only round screw threads tried and tested in the field of food hygiene are used. Disassembly and cleaning are extremely simple.
Typical application area of the product
Specially developed for viscous substances such as slurries, silt, wet clay and soil samples, soil sediments, oils, emulsions, creams etc.
- ViscoSampler PTFE/FEP
Specifications
General material
PTFE
Polytetrafluoroethylene
General material
FEP
Fluorinated ethylene propylene
Further materials
NBR
Nitrile butadiene rubber
Further materials
Al
Aluminium
Further materials
PP
Polypropylene
Further materials
PVDF
Polyvinylidene fluoride
Dimensions
- Immersion depth max.:
- 60 cm
- Pipe Ø:
- 25 mm
- Total length:
- 770 mm
Sample quantity
- Sample quantity:
- 160 ml
Nozzle/tip
- Outer Ø:
- 32 mm
- Opening Ø:
- 10 mm
Complementary products
Cleaning brushes
Drain safety stand
Similar products
Dip Sampler, plunging siphon
Dip sampler for simple removal of liquid samples. Good view due to transparent tubes. Upper end with reflux valve, lower end with ball valve.
Disposable plunging siphon
If strongly adhesive liquids are sampled, it can be a lot less expensive to dispose of the sampler than to carry out a complicated cleaning process.
The disposable dip sampler were developed especially for this purpose. They are made of PE, transparent and the contents are easily visible. PE provides a surface that resists adhesion of the sample material, minimising sample retention on the dip sampler.
Mini ViscoSampler
Sampler for viscous substances such as pastes, mud, creams, oils. The sample is drawn in using the pump rod and directly conveyed to a sampling container. Easy cleaning for flawless sampling.
QualiSampler set
The handy set, which comes complete with carrying case, combines the LiquiSampler and the ViscoSampler with practical accessories.
Models in PP or PTFE/FEP.
Sampler Liquid CupSampler
It is possible to carry out point sampling of liquids of varying viscosity with the stainless steel AISI 316L (1.4404) Liquid CupSampler. Media-containing particles can also be sampled without difficulty.
The sampler can be used in the fields of chemistry, foodstuffs and cosmetics.
The cup can be unscrewed from the stem, allowing easy cleaning.
ChemoSampler
The samples are drawn directly into the screw-on original sampling bottle. The tamperproof bottle closure of these bottles with original safety ring ensures unadulterated sample transport. Samples can be taken from depths of as much as 200 cm, e.g. from tanks, silos or tankers, by using the extension rod.
ViscoSampler PP
ViscoSampler with powerful suction for viscous media. The media is drawn up and discharged using the suction flask. Made of ultra-pure, chemically inert PTFE/FEP for contamination-free sampling.
Easy cleaning - all surfaces are poreless and without crevices. Dirt accumulation is prevented. Only round screw threads tried and tested in the field of food hygiene are used. Disassembly and cleaning are extremely simple.
LiquiSampler PTFE/FEP
LiquiSampler for liquids, according to DIN EN ISO 15528. Made of ultra pure and chemically inert PTFE/FEP or PP for contamination-free sampling.
Sampling from open and closed containers, barrels, tanks, silos, water courses. Suitable for all commercially available barrels and containers with opening of at least 32 mm in diameter.
Easy cleaning - all surfaces are free of pores and crevices, preventing accumulation of dirt. Only round screw threads proven in foodstuffs hygiene are used. Disassembly and cleaning are extremely simple.