View in the flip catalogue
To all specifications

Packaging unit

Piece

Detailed information

LiquiSampler for liquids, according to DIN EN ISO 15528. Made of ultra pure and chemically inert PTFE/FEP or PP for contamination-free sampling.

Sampling from open and closed containers, barrels, tanks, silos, water courses. Suitable for all commercially available barrels and containers with opening of at least 32 mm in diameter.

Easy cleaning - all surfaces are free of pores and crevices, preventing accumulation of dirt. Only round screw threads proven in foodstuffs hygiene are used. Disassembly and cleaning are extremely simple.

Typical application area of the product

Sampling from open and closed containers, barrels, tanks, silos, water courses. Suitable for all commercially available barrels and containers with opening of at least 32 mm in diameter.
How to use the product
All-layer sample
  1. Slowly insert the LiquiSampler into the liquid with the button pressed.
  2. Release the push-button, the valve closes.
  3. Withdraw the lance and take out the sample.
Point sampling/bottom sample
  1. Insert the LiquiSampler to the targeted point/to the ground with closed valve.
  2. Press the button - the liquid flows in.
  3. Release the push-button, the valve closes.
  4. Pull out the LiquiSampler, take out the sample.
5330-xxx0_liquisampler_gebrauchsanleitung.pdf 5330-xxx0_liquisampler_gebrauchsanleitung.pdf
  • LiquiSampler PTFE/FEP

Specifications

General material

FEP
Fluorinated ethylene propylene

General material

PTFE
Polytetrafluoroethylene

Dimensions

Pipe Ø:
25 mm
Immersion depth max.:
60 cm
Total length:
738 mm

Nozzle/tip

Outer Ø:
32 mm
Opening Ø:
17 mm

Sample quantity

Sample quantity:
150 ml

Sampling

Sampling type:
All-layer or target point sample
Sample material:
free-flowing
To the list of chemical resistance

Complementary products

Glass sample bottles Glass sample bottles

Glass sample bottles

Glass sample bottles with blue cap and ring, PP, easy to read scale, large labelling area. Pouring ring for clean working. Ideal for storage and transport of substances.
Narrow neck reagent bottles Narrow neck reagent bottles

Narrow neck reagent bottles

Narrow neck reagent bottles for storing, packaging, sampling or transporting liquids. Transparent HDPE allows the contents to be seen. Blue tamper evident PP screw cap ensures leak proof storage.
Cleaning brushes Cleaning brushes

Cleaning brushes

Cleaning brushes provide effective and thorough cleaning in a variety of areas. Made from high quality stainless steel and fitted with durable bristles, they effortlessly remove dirt, debris and contaminants from surfaces.

Similar products

LiquiSampler PP LiquiSampler PP

LiquiSampler PP

LiquiSampler for liquids, according to DIN EN ISO 15528. Made of ultra pure and chemically inert PTFE/FEP or PP for contamination-free sampling.

Sampling from open and closed containers, barrels, tanks, silos, water courses. Suitable for all commercially available barrels and containers with opening of at least 32 mm in diameter.

Easy cleaning - all surfaces are free of pores and crevices, preventing accumulation of dirt. Only round screw threads proven in foodstuffs hygiene are used. Disassembly and cleaning are extremely simple.
Dip Sampler, plunging siphon Dip Sampler, plunging siphon

Dip Sampler, plunging siphon

Dip sampler for simple removal of liquid samples. Good view due to transparent tubes. Upper end with reflux valve, lower end with ball valve.
Disposable plunging siphon

Disposable plunging siphon

If strongly adhesive liquids are sampled, it can be a lot less expensive to dispose of the sampler than to carry out a complicated cleaning process.

The disposable dip sampler were developed especially for this purpose. They are made of PE, transparent and the contents are easily visible. PE provides a surface that resists adhesion of the sample material, minimising sample retention on the dip sampler.
DispoPipette, sterile DispoPipette, sterile

DispoPipette, sterile

Simple disposable sampler for taking samples of low viscosity media. If the DispoPipette is inserted into the liquid opened, an all-layer sample is obtained. If it is closed while it is inserted up to the sampling point and then opened, a target-point sample is obtained. Very easy to operate. With two opening sizes (2,5/5,5 mm) for different viscosities.
DispoPipette DispoPipette

DispoPipette

Simple disposable sampler for taking samples of low viscosity media. If the DispoPipette is inserted into the liquid opened, an all-layer sample is obtained. If it is closed while it is inserted up to the sampling point and then opened, a target-point sample is obtained. Very easy to operate. With two opening sizes (2,5/5,5 mm) for different viscosities.
DispoTube DispoTube

DispoTube

The ergonomic handle of the DispoTube makes it easier to work and facilitates a good grip even under difficult conditions, for example with gloves. Disposable sampler for taking samples of liquids.
DispoTube, sterile DispoTube, sterile

DispoTube, sterile

The ergonomic handle of the DispoTube makes it easier to work and facilitates a good grip even under difficult conditions, for example with gloves. Disposable sampler for taking samples of liquids.
LiquiDispo, sterile LiquiDispo, sterile

LiquiDispo, sterile

The LiquiDispo disposable sampler can be used to take samples of liquids from highly liquid to slightly viscous. An ergonomic handle makes it easier to draw the sample: up to 200 ml can be drawn, as with a syringe.
LiquiDispo LiquiDispo

LiquiDispo

The LiquiDispo disposable sampler can be used to take samples of liquids from highly liquid to slightly viscous. An ergonomic handle makes it easier to draw the sample: up to 200 ml can be drawn, as with a syringe.
QualiSampler set

QualiSampler set

The handy set, which comes complete with carrying case, combines the LiquiSampler and the ViscoSampler with practical accessories.

Models in PP or PTFE/FEP.