Deutsch
français
español
русский
Stainless steel thread adapter internal G 1 1/2"- internal G 2"
Barrel adapters to compensate for different thread types
- Adapts from G 1 ½" male thread to G 2" male thread
- Made from high quality stainless steel
- Suitable for flammable liquids
Packaging unit
Piece
Detailed information
The thread adapter, made from high quality stainless steel 304 (1.4301), allows a pump, drain cock or any other connection with a G 2-inch thread (Whitworth pipe thread) to be screwed onto a container with a G 1 1/2-inch thread.
The thread adapter compensates for different thread shapes.
The drum adapter ensures liquid-tight decanting; an ePTFE seal reliably seals the connection.
The stainless steel thread adapter is electrically conductive and chemically highly resistant and can therefore be used for filling solvents and other flammable liquids (e.g. alcohols, petrol, diesel, etc.) as well as weak alkalis and acids.
Typical application area of the product
Thread adapter for securely fastening barrel screw joints, barrel pumps, taps etc. to canisters, steel drums, barrels or safety containers.
- Thread adapter stainless steel inner G 1 1/2"- inner G 2"
Specifications
General material
1.4301 (AISI 304)
Stainless steel (1.4301), AISI 304
Further materials
PTFE
Polytetrafluoroethylene
Gewinde
- Thread:
- G 1 1/2 Zoll
- Version:
- Internal thread
Additional thread
- Thread:
- G 2 inch
- Version:
- Internal thread
Colouring
- Colour:
- silver
Complementary products
Safety jerrycans stainless steel, with fine dosage spout
Safety canister made of stainless steel AISI 316 Ti (1.4571).
In canisters with excess pressure valve, pressure balance takes place from about 0.3 bar.
Safety canister with self-closing fine dosage spout 20 l: with separate ventilation.
Safety jerrycans stainless steel, with fine dosage spout and ventilation screw
Safety canister made of stainless steel AISI 304 (1.4301).
In canisters with excess pressure valve, pressure balance takes place from about 0.3 bar.
Safety canister with self-closing fine dosage spout 20 l: with separate ventilation.
Canisters with a venting screw enable manual air supply when used or manual pressure balance during storage.
Safety jerrycans stainless steel with UN approval
Safety canister made of stainless steel AISI 316 Ti (1.4571).
Safety jerrycans stainless steel, with screw cap
Safety canister made of stainless steel AISI 316 Ti (1.4571) for 5 l and 10 l canisters and AISI 304 (1.4301) for 20 l canisters.
In canisters with excess pressure valve, pressure balance takes place from about 0.3 bar.
Safety storage container stainless steel with pressure-relief valve
Safety containers for transport and storage with thickness of sides of 1.5 mm.
In safety containers with excess pressure valve, pressure balance takes place from about 0.3 bar.
Safety storage container stainless steel with UN approval
Safety containers for transport and storage with thickness of sides of 1.2 mm (25 l).
The 25 l container can be stacked.
Solvent pump hand operated
Hand-operated solvent pump for contaminationfree removal of organic solvents and flavouring agents. The hand pump works according to the overpressure principle. An excess pressure is built up in the tank with the pump ball, forcing the liquid out of the container.
Pouring flammable liquids
All medium-contacting parts are made of stainless steel AISI 304 (1.4301) and PTFE. The Bürkle anti-static set can be used to ground the pump for dispensing flammable liquids so that no electrostatic charge forms.
Gastight version
The pump can be completely closed off with the two ball valves so that no dangerous vapours can escape after dispensing.
Suitable for different containers
The hand pump is suitable for containers up to 60 litres.
Solvent pump foot operated - discharge tube
Barrel pump for solvents with rigid discharge tube.