Deutsch
français
español
русский
ProfiSampler Aluminium
- Three feet guarantee that the ProfiSampler stands safely
- Fill level control, automatic return flow and overfill protection through built-in venting valve
- Available with suction hose in PE, PA and PTFE wherever the highest degree of purity is required
- Can be supplied with straight suction tubes for simpler sampling, incl. transport case for tidy transport and disposal of the suction tubes
- Suction volume 200 ml, suction pressure 0.5 bar
- Suction height from liquid surface 5 m WS
- Sample bottles available in different materials and sizes
Packaging unit
Piece
Please note
Pay attention to the chemical resistance of the materials! See also List of chemical resistance
Caution! When handling flammable, highly flammable liquids, the explosion protection guidelines must be observed. All parts must be earthed, use anti-static set!
Detailed information
ProfiSampler aluminium for solvents and flammable liquids in Explosion Categories IIA, IIB and IIC. With bottle thread GL 45 (suitable for Schott glass bottles 100 ml to 1000 ml).
When taking samples of flammable liquids, the device must be earthed. For this, earthing cable and, possibly in addition, anti-static set should be used, see accessories.
While the MiniSampler is designed for laboratory use, the ProfiSampler has been specially developed for rough industrial use.
Vacuum samplers have the advantage that the sample liquid only comes into contact with the suction hose and the original sample bottle. The possibility of cross-contamination is greatly reduced. Immediately after taking the sample, the bottles are sealed. The disposable suction hose can quickly be replaced. This guarantees that the samples are always authentic. If necessary, a new hose can be used for every single sample.
Due to its small diameter (8 mm), the hose can reach narrow, seemingly inaccessible sampling areas.
Typical application area of the product
Sampling liquids in barrels, tanks, lorries, railway goods wagons, ships, water courses, ground water, etc.
- Vacuum pump made of aluminium, with feet, venting valve and bottle thread GL 45
- Glass bottle 500 ml
- 5 suction tubes PA black (220 cm long, electrically conductive)
- Hose cutter
- Brass hose weight
- 20x seal-it bottle seal
- Earthing cable
Specifications
General material
GL
Glass
General material
PA
Polyamide
General material
MS
Brass
Further materials
Al
Aluminium
Further materials
EPDM
Ethylene propylene diene monomer rubber
Limit values
- Intake height:
- 5 m/WS
Gewinde
- Thread:
- GL 45
- Version:
- Internal thread
Tubing length
- Hose length:
- 220 cm
Contents of collection container
- Contents:
- 500 ml
Complementary products
Glass sample bottles
Straight suction tubes for ProfiSampler
Straight suction tubes (PE or PA) have the advantage that they are not slightly bent as is the standard tubing (from the roll) and can therefore be immersed absolutely vertically into the container. The suction tubes are available in transparent PE for general sampling and black PA for flammable liquids in VbF Hazard Category AI (electrically conducting). Diameter 6 x 8 mm.
Contamination banned! In practice the low-priced tubes are only used once. They are then disposed of, instead of being subjected to a costly cleaning process. The tubes are not autoclavable.
Transport case for straight suction tubes
Suction tube case for the practical transport of new suction tubes and the safe storage of used ones. Suitable for 100 suction tubes, 220 cm long.
Anti-static set
When decanting flammable liquids without the machines and containers involved in the process being sufficiently earthed, electrostatic build-up can occur, which for many substances can result in fire or an explosion.
Bürkle’s Anti-static set ensures easy and reliable earthing.
The Anti-static set consists of three colour-coded connecting copper cables with clamps in a handy plastic case.
PE hose
PE hose
