To all specifications

Packaging unit

Piece

Please note

Pay attention to the chemical resistance of the materials! See also List of chemical resistance

Detailed information

PP barrel pump with flexible discharge hose made of PVC, length of 1.2 m and stopcock.

Barrel pumps made of polypropylene allow a fast transfer of liquids from barrels, canisters and tanks.

The low-mounted non-return valve of the barrel pump and the immersion depth that can be steplessly adjusted using the barrel screw joints ensure good removal of residual liquid. The barrel screw joint fastens the barrel's pump securely to the barrel. Barrel screw joints and thread adapters for commercially available containers are available as optional accessories.

Typical application area of the product

The good chemical resistance of PP allows acids, alkalis and aggressive detergents to be transferred.

barrel pump with discharge hose and stopcock

Specifications

General material

PP
Polypropylene

Further materials

PTFE
Polytetrafluoroethylene

Further materials

PE-HD
High-density polyethylene (HDPE)

Further materials

PVC
Polyvinyl chloride

Delivery tube

Immersion depth max.:: 50 cm

Throughput

Conveying capacity:: 200 ml/stroke
Max. delivery rate:: 12 l/min

Ø

Immersion tube Ø:: 32 mm

Colouring

Colour:: grey/blue

Connection

Connection type:: Barrel screw joint
For openings from:: 32 mm

Limit values

Viscosity up to:: 500 mPa*s

Pump outlet

Outlet type:: Discharge hose
Outer outlet Ø:: 12 mm
Outlet hose length:: 1.2 m

To the list of chemical resistance

Container screw joint

Also for wide-necked screw caps. The screw joint 2" is screwed on from the inside using lock nut 2". (Mounting holes in the container 60 mm).

The container connectors make decanting even easier and safer with their more secure connection to barrels. The connectors secure the pump in the barrel, enable a vertical position change and allow the required air exchange.

PVC barrel plug

Barrel bungs made of PVC, consisting of two parts, therefore can be used for various openings with a diameter from 40–70 mm.

Universal thread adapter

Universal thread adapter for nearly all drums and other containers with opening of 48–75 mm in diameter, regardless of the respective thread. The thread adapter can be mounted quickly and easily with clamping screws and can be used for different container openings.

With G2" connector thread for Bürkle drum screw connections and pumps with immersion tube diameter up to 32 mm.