Deutsch
français
español
русский
Powder sampler Mini
Stainless steel sampler for small pharmaceutical quantities
- Sampling of small volumes (0.01 - 0.1 ml)
- Quick and easy to use at the push of a button
Packaging unit
Piece
Detailed information
The powder sampler Mini is a small volume stainless steel sampler.
When the button is pressed, a sampling rod enters the sample material and retracts when the button is released. In this way a fixed amount of sample material is enclosed in the sampling notch of the rod and removed.
The sampler accurately collects sample volumes of 0.01 ml, 0.05 ml and 0.1 ml, depending on the version.
With an insertion depth of up to 300 mm, multiple target point samples can be taken at different depths.
The small volume powder sampler is manufactured from high quality stainless steel 1.4404/1.4571 (316L/316Ti).
Typical application area of the product
The Mini powder sampler is used for sampling powdered products from small containers, bags, drums or open vessels. It is primarily used in the pharmaceutical, medical products and biotechnology industries, e.g. for testing raw materials, active ingredients and excipients.
How to use the product
- Insert the powder sampler into the powder to be sampled to the desired depth.
- At the desired depth, extend the inner rod by pressing the button.
- Move the sampler gently up and down. This will fill the collection chamber with the powder to be sampled.
- Retract the inner rod.
- Pull the sampler out of the powder.
- Extend the inner rod and empty the sample into a suitable collection container.
- Clean the sampler.
- Powder sampler Mini
- Sample set close-it
Specifications
General material
1.4404 (316L)
Stainless steel 1.4404, AISI 316L
Further materials
1.4571
Stainless steel 1.4571, AISI 316Ti
Sample chamber details
- Sample volume per chamber:
- 0.1 ml
- Number of collection openings:
- 1 St
Lance dimensions
- Pipe Ø:
- 6 mm
- Plunge depth:
- 300 mm
- Total length:
- 430 mm
- Outer Ø:
- 30 mm
Complementary products
Control seal close-it 95x95
Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner.
close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminium/paper) and seals the container hermetically (vapour barrier). This virtually prevents hygroscopic powders from clumping together.
The labels are available in different colours. With printing in red, blue, green, yellow, black or neutral (without printing in white).
close-it can be written on with ball-point pen, pencil or felt-tip marker.
The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.
Control seal close-it maxi 150x150
Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner.
close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminium/paper) and seals the container hermetically (vapour barrier). This virtually prevents hygroscopic powders from clumping together.
The labels are available in different colours. With printing in red, blue, green, yellow, black or neutral (without printing in white).
close-it can be written on with ball-point pen, pencil or felt-tip marker.
The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.
Closure seal close-it food & pharma 95x95
In response to many requests from our customers, we have developed close-it food & pharma, a closure seal with an adhesive approved for foodstuffs. The adhesive strength of the adhesive is almost the same as the original, the tried and tested close-it from Bürkle. close-it food & pharma also prevents bulk goods from trickling out after sampling.
The adhesive complies with European food directives. Like the original, close-it food & pharma has an aluminium foil barrier layer. This makes close-it food & pharma suitable for sampling foodstuffs, pharmaceuticals, cosmetics, food supplements, even frozen goods - in short, anywhere where special purity is required.
Closure seal close-it food & pharma Maxi 150x150
In response to many requests from our customers, we have developed close-it food & pharma, a closure seal with an adhesive approved for foodstuffs. The adhesive strength of the adhesive is almost the same as the original, the tried and tested close-it from Bürkle. close-it food & pharma also prevents bulk goods from trickling out after sampling.
The adhesive complies with European food directives. Like the original, close-it food & pharma has an aluminium foil barrier layer. This makes close-it food & pharma suitable for sampling foodstuffs, pharmaceuticals, cosmetics, food supplements, even frozen goods - in short, anywhere where special purity is required.
Similar products
MicroSampler powder sampler for samples 0.2 - 1.0 ml
The MicroSampler has especially been designed for the sampling of small quantities of powder.
Volumes of 0.2 ml, 0.5 ml, 1.0 ml, 2.0 ml, 5.0 ml and 10 ml can be sampled easily, quickly and cleanly from different sampling depths from sacks or containers.
The tips of the MicroSampler are interchangeable. This means that tips with different volumes can be used.
MicroSampler powder sampler for samples 2.0 - 10 ml
The MicroSampler has especially been designed for the sampling of small quantities of powder.
Volumes of 0.2 ml, 0.5 ml, 1.0 ml, 2.0 ml, 5.0 ml and 10 ml can be sampled easily, quickly and cleanly from different sampling depths from sacks or containers.
The tips of the MicroSampler are interchangeable. This means that tips with different volumes can be used.
Novartos Multi pharmaceutical zone sampler 2-compartment sampler
Novartos Uno pharmaceutical zone sampler 2-compartment sampler
PharmaPicker Case complete
PharmaPicker Case consisting of: Collection cylinders in both sizes, extension rod 50 cm and 100 cm, handle, volume tips 0.4 ml, 0.6 ml, 0.8 ml, 1.0 ml, 1.2 ml, 1.4 ml, 1.8 ml, 2.0 ml, 2.3 ml and 2.5 ml (alternative sample volumes on request), transport box.
StickProof
Sampler for powder in the pharma area, made of stainless steel AISI 316L, material 1.4404. The especially slender tip can be inserted easily and deeply in order to take the sample. The conical inlet of the tip allows the collection of either very small or larger quantities. StickProof is constructed in one piece without edges, grooves or crevices for perfect and easy cleaning. The sample can be filled directly into the sampling bag from the outlet end. Fasten the bag with a sturdy clamp.
PharmaSpoon
PharmaSpoon for taking samples of powdery substances, intermediate products and material in the pharmaceutical industry. Special materials with excellent surface qualities must be used for this to prevent cross-contamination. Our PharmaSpoon fulfils these requirements. Made of stainless steel AISI 316L (1.4404), surface highly polished by hand (not electro-polished!). The excellent surface properties of the PharmaSpoon provide significant advantages.
Mini ViscoSampler
Sampler for viscous substances such as pastes, mud, creams, oils. The sample is drawn in using the pump rod and directly conveyed to a sampling container. Easy cleaning for flawless sampling.