Deutsch
français
español
русский
MicroSampler powder sampler for samples 0.2 - 1.0 ml
- Point sampling
- Various lengths and volumes are available
- Tip can be removed, easy cleaning
- Stainless steel AISI 316L (1.4404)
- Sterilisable
- Additional tips are available in different sizes
Packaging unit
Piece
Please note
Please order the desired head as an accessory!
Detailed information
The MicroSampler has especially been designed for the sampling of small quantities of powder.
Volumes of 0.2 ml, 0.5 ml, 1.0 ml, 2.0 ml, 5.0 ml and 10 ml can be sampled easily, quickly and cleanly from different sampling depths from sacks or containers.
The tips of the MicroSampler are interchangeable. This means that tips with different volumes can be used.
Typical application area of the product
The MicroSampler has especially been designed for the sampling of small quantities of powder.
How to use the product
Use
- Insert MicroSampler into powder.
- At the predetermined point, open the volume tip by pressing the button, the sample flows in.
- Close the volume tip, the sample is collected.
- Pull back the lance, open the volume tip again, empty the sample.
Specifications
General material
1.4404 (316L)
Stainless steel 1.4404, AISI 316L
Further materials
PA
Polyamide
Further materials
1.4310
Stainless steel 1.4310 (spring steel), AISI 301
Collector dimensions
- Outer Ø:
- 12 mm
- Plunge depth:
- 550 mm
- Total length:
- 652 mm
Lance for collection volume
- For collection volumes of:
- 0.2 ml
- For collection volumes up to:
- 1 ml
You need
Similar products
MicroSampler powder sampler for samples 2.0 - 10 ml
The MicroSampler has especially been designed for the sampling of small quantities of powder.
Volumes of 0.2 ml, 0.5 ml, 1.0 ml, 2.0 ml, 5.0 ml and 10 ml can be sampled easily, quickly and cleanly from different sampling depths from sacks or containers.
The tips of the MicroSampler are interchangeable. This means that tips with different volumes can be used.
Powder sampler Mini
PharmaPicker
For sampling very small quantities of highly potent, expensive or active powders for analysis. The smallest sample quantities from 0.1 ml to 2.5 ml can be collected with the PharmaPicker. By simply exchanging the volume tip in the collection cylinder for 0.1–1.2 ml or 1.25–2.5 ml, the sampling volume is modified.
The PharmaPicker has a length of 60 cm and can be extended repeatedly by 50 cm or 100 cm, maximum length 3.50 m.
StickProof
Sampler for powder in the pharma area, made of stainless steel AISI 316L, material 1.4404. The especially slender tip can be inserted easily and deeply in order to take the sample. The conical inlet of the tip allows the collection of either very small or larger quantities. StickProof is constructed in one piece without edges, grooves or crevices for perfect and easy cleaning. The sample can be filled directly into the sampling bag from the outlet end. Fasten the bag with a sturdy clamp.
PharmaSpoon
PharmaSpoon for taking samples of powdery substances, intermediate products and material in the pharmaceutical industry. Special materials with excellent surface qualities must be used for this to prevent cross-contamination. Our PharmaSpoon fulfils these requirements. Made of stainless steel AISI 316L (1.4404), surface highly polished by hand (not electro-polished!). The excellent surface properties of the PharmaSpoon provide significant advantages.
ViscoSampler
ViscoSampler with powerful suction for viscous media. The media is drawn up and discharged using the suction flask. Made of ultra-pure, chemically inert PTFE/FEP for contamination-free sampling.
Easy cleaning - all surfaces are poreless and without crevices. Dirt accumulation is prevented. Only round screw threads tried and tested in the field of food hygiene are used. Disassembly and cleaning are extremely simple.