To all specifications

Packaging unit

Piece

Detailed information

OTAL® foot pump with disposable HDPE delivery tubes, for single use.

The large volume foot-operated bellows makes it easy to handle and fill containers up to 220 litres with little effort.

With OTAL® pumps, the medium to be filled only comes into contact with the delivery tube.
The disposable delivery tube can be replaced quickly and easily after use.

With commercially available reusable pumps, there is a risk that the liquid to be filled will be contaminated by the pump - especially if the pump is used for different media or containers and no professional cleaning is carried out before replacement.
The space-saving container pump is specially designed for single use, so time-consuming and costly cleaning is completely unnecessary and contamination is ruled out.

The delivery pipe of the filling pump is made of one piece and can be easily shortened to the respective container height using the cutter provided. This offers maximum flexibility and guarantees good residual emptying of the container. The outlet of the delivery tube can also be shortened if required.

Filling with OTAL® pumps works with airtight containers (drums, canisters, barrels or similar) with an opening Ø between 30 and 70 mm.  Due to the PVC universal plug, no thread connection and thus no determination of the container thread is necessary. Containers up to a height of 90 cm are emptied completely.

The disposable pump is ideal when special cleanliness is required, cleaning is difficult or not possible at all.

Typical application area of the product

The disposable foot pump is suitable for filling thin-bodied to low-viscosity liquids up to 500 mPas, e.g. acids, alkalis, cleaning agents, liquids in the food sector. The pump is ideal for airtight containers up to approx. 220 liters.
How to use the product
  1. Push delivery pipe into universal plug and attach pump ball.
  2. Cut delivery pipe slightly diagonally at container height.
  3. Build up pressure by means of pump ball and fill.
  4. To change the delivery pipe, cut off the pipe directly below the stopper.
  5. Dispose of the lower end of the tube directly, pull the upper end out of the universal plug.
  6. Insert new tube.
  • 10 x delivery tube, single-use
  • Universal plug, three-part
  • Foot bellows
  • Cutter

Specifications

General material

PE-HD
High-density polyethylene (HDPE)

Further materials

PVC
Polyvinyl chloride

Delivery tube

Immersion depth max.:
90 cm
Immersion depth from:
10 cm
Immersion depth up to:
90 cm

Throughput

Conveying capacity:
14 l/min

Connection

Connection type:
Variable universal stopper
For openings from:
30 mm
For openings up to:
70 mm

Ø

Pipe Ø:
12 mm
Immersion tube Ø:
12 mm

Pump outlet

Outlet type:
Discharge tube
Length of discharge tube:
200 mm
Outer outlet Ø:
12 mm

Colouring

Colour:
red/yellow

Limit values

Viscosity up to:
500 mPa*s
To the list of chemical resistance

You need

The following accessories are required to use the product

You need

Delivery tubes PE, for OTAL® disposable pump

The HDPE delivery tubes are accessories for the OTAL® disposable pumps.They are made of high quality, high density polyethylene, have excellent chemical resistance and are resistant to a wide range of chemicals.
Necessary accessories
OTAL® disposable hand pump OTAL® disposable hand pump

OTAL® disposable hand pump

OTAL® hand pump with disposable delivery tubes made of PE for single use. With OTAL® pumps, the medium to be filled only comes into contact with the delivery tube. The disposable delivery tube can be replaced quickly and easily after use.
OTAL® battery pump foot operation OTAL® battery pump foot operation

OTAL® battery pump foot operation

The OTAL® battery pump is a flexible pump with hose, stopcock and dosing nozzle. No need to place the container underneath - just run the 1.5m hose to the container. Adjustable discharge hose. Ideal for adding acid to car batteries.
OTAL® foot pump stainless steel OTAL® foot pump stainless steel

OTAL® foot pump stainless steel

The OTAL® foot pump with delivery tubes made of high-quality stainless steel 1.4301 (304) is ideal for filling difficult to ignite liquids of hazard class AIII (VbF). The stainless steel delivery tubes guarantee high chemical resistance as well as high temperature resistance.
OTAL® foot pump with hose & stopcock OTAL® foot pump with hose & stopcock

OTAL® foot pump with hose & stopcock

The OTAL® foot pump with hose and stopcock is flexible and space-saving. The 1.5 m long adaptable PVC hose allows flexible positioning of the filling container. The stopcock made of PP/PE enables precise dosing and prevents overflow.
OTAL® foot pump PP OTAL® foot pump PP

OTAL® foot pump PP

The OTAL® foot pump with PP delivery tubes is reliable, flexible and cost-effective. Various tubes with different diameters/flow rates are available. PP tubes are resistant to many acids, alkalis and cleaning agents.
OTAL® foot pump PVDF OTAL® foot pump PVDF

OTAL® foot pump PVDF

The OTAL® foot pump with PVDF delivery tubes is reliable and highly resistant to chemicals, also suitable for chlorine bleaching lye. The transfer pump is easy to operate and cost-effective, ideal for fast filling.