View in the flip catalogue
To all specifications

Packaging unit

Piece

Detailed information

OTAL® hand pump with disposable delivery tubes made of HDPE, for single use.

With OTAL® pumps, the medium to be filled only comes into contact with the delivery tube.
The disposable delivery tube can be replaced quickly and easily after use.

With commercially available reusable pumps, there is a risk that the pump will contaminate the liquid being pumped, especially if the pump is used for different media or containers and is not professionally cleaned before replacement.
The space-saving container pump is specially designed for single use, eliminating the need for time-consuming and costly cleaning and eliminating the risk of contamination.

The delivery tube is made in one piece and can be easily shortened to the height of the container using the supplied cutter. This provides maximum flexibility and ensures good residual emptying of the container. The outlet of the delivery tube can also be shortened if required.

Filling with OTAL® pumps works with airtight containers (drums, canisters, barrels or similar) with an opening Ø between 30 and 70 mm. Due to the PVC universal plug, no thread connection and thus no determination of the container thread is necessary. Containers up to a height of 90 cm are emptied completely.

The disposable pump is ideal when cleanliness is essential and cleaning is difficult or impossible.

Typical application area of the product

The OTAL® disposable hand pump is suitable for filling thin-bodied to low-viscosity liquids up to 500 mPas, e.g. acids, alkalis, cleaning agents, liquids in the food sector.
The pump is ideal for airtight containers up to approx. 60 litres.
How to use the product
  1. Push the delivery tube into the universal plug and attach the pump ball.
  2. Cut the delivery tube at a slight angle at the height of the container.
  3. Build up pressure with the pump ball and fill.
  4. To change the delivery tube, cut off the tube directly below the plug.
  5. Dispose of the lower end of the tube directly, pull the upper end out of the universal plug.
  6. Insert the new tube.
500x-80xx_zer03_v01_en_ex_70093.pdf 500x-80xx_zer03_v01_en_ex_70093.pdf
5005-xxxx_zer12_v07_en_ex_5000-xxxx.pdf 5005-xxxx_zer12_v07_en_ex_5000-xxxx.pdf
5005-8012_otal_einweg-handpumpe_gebrauchsanleitung.pdf 5005-8012_otal_einweg-handpumpe_gebrauchsanleitung.pdf
  • 10 x delivery tube, single-use
  • Universal plug, three-piece
  • Pump ball
  • Cutter

Specifications

General material

PE-HD
High-density polyethylene (HDPE)

Further materials

PVC
Polyvinyl chloride

Connection

For openings from:
30 mm
For openings up to:
70 mm
Connection type:
Variable universal stopper

Throughput

Conveying capacity:
14 l/min

Limit values

Viscosity up to:
500 mPa·s

Ø

Immersion depth max.:
90 cm
Pipe Ø:
12 mm
Immersion tube Ø:
12 mm

Colouring

Colour:
red/yellow

Pump outlet

Outer outlet Ø:
12 mm
Length of discharge tube:
200 mm
Outlet type:
Discharge tube

Delivery tube

Immersion depth max.:
90 cm
Immersion depth from:
10 cm
Immersion depth up to:
90 cm
To the list of chemical resistance

You need

The following accessories are required to use the product

You need

Delivery tubes PE, for OTAL® disposable pump

The HDPE delivery tubes are accessories for the OTAL® disposable pumps.They are made of high quality, high density polyethylene, have excellent chemical resistance and are resistant to a wide range of chemicals.
Necessary accessories

Similar products

OTAL® disposable foot pump OTAL® disposable foot pump

OTAL® disposable foot pump

OTAL® foot pump with disposable delivery tubes made of PE for single use. With OTAL® pumps, the medium to be filled only comes into contact with the delivery tube. The disposable delivery tube can be replaced quickly and easily after use.
OTAL® battery pump manual operation OTAL® battery pump manual operation

OTAL® battery pump manual operation

The OTAL® battery pump is a flexible pump with hose, stopcock and dosing nozzle. No need to place the container underneath - just run the 1.5m hose to the container. Adjustable discharge hose. Ideal for filling car batteries with acid.
OTAL® stainless steel hand pump OTAL® stainless steel hand pump

OTAL® stainless steel hand pump

The OTAL® hand pump with delivery tubes made of high-quality stainless steel 1.4301 (304) is ideal for filling difficult to ignite liquids of hazard class AIII (VbF). The stainless steel delivery tubes guarantee high chemical resistance as well as high temperature resistance.
OTAL® Hand pump with hose & stopcock OTAL® Hand pump with hose & stopcock

OTAL® Hand pump with hose & stopcock

The OTAL® hand pump with hose and stopcock is flexible and space-saving. The 1.5 m long adaptable PVC hose allows flexible positioning of the filling container. The PP/PE stopcock allows precise dosing and prevents overflow.
OTAL® hand pump PP OTAL® hand pump PP

OTAL® hand pump PP

The OTAL® hand pump with PP delivery tubes is reliable, flexible and cost-effective. Various tubes with different diameters/conveying capacities are available. PP tubes are resistant to many acids, alkalis and cleaning agents.
OTAL® hand pump PVDF OTAL® hand pump PVDF

OTAL® hand pump PVDF

The OTAL® hand pump with PVDF delivery tubes is reliable and has very good chemical resistance, including chlorine bleach liquor. The transfer pump is easy to use and cost effective, ideal for quick filling.
OTAL® mini hand pump PP OTAL® mini hand pump PP

OTAL® mini hand pump PP

The OTAL® Mini Hand Pump PP is ideal for smaller containers. With a smaller plug (20-36 mm) and an immersion depth of 45 cm, it is ideal for containers up to 10 litres. Resistant to weak acids and alkalis. Cost-effective alternative for reliable filling.