bk.product.specification-anchor-link.label

bk.product.packaging-unit.label

Piece

Detailed information

The Spiralus zone sampler guarantees representative all-layer samples thanks to its spiral-shaped sample slots. The Spiralus zone sampler takes a zone-accurate all-layer sample through all layers of the bulk material. The spiral-shaped opening of the sample slots, which open with a time delay from the bottom to the top, enables the Spiralus to take a layer-accurate and representative sample. The special design of the Spiralus prevents grains from being cut and thus ensures excellent reproduction of the stratification when sampling from coarse-grained bulk materials.

The low weight of the Spiralus makes it easy to handle and use in different environments. With open handle for easy emptying of the mixed sample.

bk.product.scope_of_application.tab_headline

The Spiralus zone sampler is primarily used in the agricultural industry to sample grain and pellets from silos, warehouses or directly from means of transportation such as trucks and rail cars. It is also valuable in the food industry and materials management where coarse grained products need to be checked for quality and homogeneity.
bk.product.utilization.tab_headline
  1. Turn the handle of the all-layer sampler clockwise, it is now closed and can be pierced into the powder/granulate.
  2. At the desired depth, turn the handle of the collector counterclockwise, the collection chambers are opened and filled with sample.
  3. By turning the handle clockwise again, the collector is closed again and can be removed from the powder/granulate.
  4. Turn the all-layer collector upside down and empty the all-layer sample through the opening in the handle into a suitable collecting vessel.
5318-0xxx_zonensammler_spiralus_gebrauchsanleitung.pdf 5318-0xxx_zonensammler_spiralus_gebrauchsanleitung.pdf
  • Zone sampler Spiralus

bk.product.specifications.title

bk.product.general_material.label

Al
Aluminum

bk.product.detail_material.label

PA
Polyamide

Sample chamber details

Anzahl Sammelöffnungen:
8 itms
Probenvolumen gesamt:
770 ml

Lance dimensions

Rohr-Ø:
38 mm
Außen-⌀:
50 mm
Einstechtiefe:
1320 mm
Gesamtlänge:
1460 mm

Collecting chamber dimensions

Kammernlänge:
92.5 mm
Beginn der Sammelkammer:
135 mm
Kammernbreite:
22 mm
Abstand zwischen den Kammern:
125 mm

Sampling lances

Probenahmeart:
All-layer sample/cross-section sample
Proben Körnung:
powdery/fine-grained,medium-grained
Proben Material:
free-flowing
Besondere Eigenschaften Probenlanzen:
round tip,low weight
Spitze:
rounded

bk.product.optional_accessories.tab_title

Closure seal close-it food & pharma Closure seal close-it food & pharma

Closure seal close-it food & pharma

In response to many requests from our customers, we have developed close-it food & pharma, a closure seal with an adhesive approved for foodstuffs. The adhesive strength of the glue is almost the same as the original, the tried and tested close-it from Bürkle. close-it food & pharma also prevents bulk goods from trickling out after sampling.

The adhesive complies with European food directives. Like the original, close-it food & pharma has a barrier layer of aluminum foil. This makes close-it food & pharma suitable for sampling foodstuffs, pharmaceuticals, cosmetics, food supplements, even frozen goods - in short, anywhere where special purity is required.
Cleaning brushes Cleaning brushes

Cleaning brushes

Cleaning brushes offer effective and thorough cleaning in various areas. Made of high-quality stainless steel and equipped with hard-wearing bristles, they remove dirt effortlessly.
Control seal close-it 95x95 (3.74x3.74) Control seal close-it 95x95 (3.74x3.74)

Control seal close-it 95x95 (3.74x3.74)

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner.

close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminum/paper) and seals the container hermetically (vapor barrier). This virtually prevents hygroscopic powders from clumping together. 

The labels are available in different colors. With printing in red, blue, green, yellow, black or neutral (without printing in white).

close-it can be written on with ball-point pen, pencil or felt-tip marker.

The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.
Control seal close-it maxi 150x150 (5.91x5.91) Control seal close-it maxi 150x150 (5.91x5.91)

Control seal close-it maxi 150x150 (5.91x5.91)

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner.

close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminum/paper) and seals the container hermetically (vapor barrier). This virtually prevents hygroscopic powders from clumping together. 

The labels are available in different colors. With printing in red, blue, green, yellow, black or neutral (without printing in white).

close-it can be written on with ball-point pen, pencil or felt-tip marker.

The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.
Closure seal close-it food & pharma Maxi 150x150 Closure seal close-it food & pharma Maxi 150x150

Closure seal close-it food & pharma Maxi 150x150

In response to many requests from our customers, we have developed close-it food & pharma, a closure seal with an adhesive approved for foodstuffs. The adhesive strength of the glue is almost the same as the original, the tried and tested close-it from Bürkle. close-it food & pharma also prevents bulk goods from trickling out after sampling.

The adhesive complies with European food directives. Like the original, close-it food & pharma has a barrier layer of aluminum foil. This makes close-it food & pharma suitable for sampling foodstuffs, pharmaceuticals, cosmetics, food supplements, even frozen goods - in short, anywhere where special purity is required.
close-it tape Special adhesive tape close-it tape Special adhesive tape

close-it tape Special adhesive tape

Besides the individually detachable close-it and close-it food & pharma closure labels, our repeatedly tested and proven control seal is now also available on a continuous roller. This helps you discover whether you require only a small piece, for example for closing a small hole, or for marking a specific point. Or whether you want to repair a long crack or a large hole quickly, reliably and easily. With its extremely strong adhesive strength, close-it tape holds on the most diverse bases, where the glue effect of normal adhesive tape quickly reaches its maximum capacity.

For universal use, we have kept the adhesive tape close-it tape in white with tear-off lines. It can be labeled with permanent ink and locks gas-proof. Available in the classic close-it design, as well as close-it tape food & pharma, with a food-compatible adhesive.
close-it tape food & pharma close-it tape food & pharma

close-it tape food & pharma

Besides the individually detachable close-it and close-it food & pharma closure labels, our repeatedly tested and proven control seal is now also available on a continuous roller. This helps you discover whether you require only a small piece, for example for closing a small hole, or for marking a specific point. Or whether you want to repair a long crack or a large hole quickly, reliably and easily. With its extremely strong adhesive strength, close-it tape holds on the most diverse bases, where the glue effect of normal adhesive tape quickly reaches its maximum capacity.

For universal use, we have kept the adhesive tape close-it tape in white with tear-off lines. It can be labeled with permanent ink and locks gas-proof. Available in the classic close-it design, as well as close-it tape food & pharma, with a food-compatible adhesive.

bk.product.similar_products.tab_title

All-layer sampler aluminum All-layer sampler aluminum

All-layer sampler aluminum

The all-layer sampler with open inner tube is the ideal sampler for taking all-layer or mixed samples from bulk materials of all kinds, from the finest powders to larger grains.
All-layer sampler 316L (1.4404) All-layer sampler 316L (1.4404)

All-layer sampler 316L (1.4404)

The all-layer sampler with open inner tube is the ideal sampler for taking all-layer or mixed samples of all types of bulk materials, from the finest powders to larger grains.
Jumbo sampler zone sampler for larger volumes, all-layer Jumbo sampler zone sampler for larger volumes, all-layer

Jumbo sampler zone sampler for larger volumes, all-layer

Thanks to its open inner tube with no separate chambers, the all-layer Jumbo sampler ensures a homogeneous mixed sample that accurately reflects the overall composition of the material, even with heterogeneous materials.
Jumbo sampler zone sampler for larger quantities, Multi Jumbo sampler zone sampler for larger quantities, Multi

Jumbo sampler zone sampler for larger quantities, Multi

The Multi jumbo sampler separates sample material using separators, allowing multiple point samples to be taken from different layers of a bulk material. These can be analyzed specifically or combined to form a mixed sample. Autoclavable and flame retardant for minimal risk of contamination.
Multi-stage sampler multi-sampler 316L (1.4404) Multi-stage sampler multi-sampler 316L (1.4404)

Multi-stage sampler multi-sampler 316L (1.4404)

The multi-sampler with separate collection chambers is a special sampler for simultaneous sampling of multiple target points from different zones or layers of bulk materials. The stainless steel multi-sampler provides excellent chemical resistance.
Multi-stage sampler multi-sampler 316L (1.4404)/PTFE Multi-stage sampler multi-sampler 316L (1.4404)/PTFE

Multi-stage sampler multi-sampler 316L (1.4404)/PTFE

The multi-sampler with separate collection chambers is a sampler for simultaneous collection of multiple target point samples from different areas or layers of bulk solids. It combines the advantages of rugged and inert stainless steel with the light weight of PTFE.
Multi-stage sampler Multi sampler, aluminum Multi-stage sampler Multi sampler, aluminum

Multi-stage sampler Multi sampler, aluminum

The multi-collector with separate collection chambers is a sampler for the simultaneous collection of several target point samples from different zones or layers of bulk materials. Aluminum is very light, which makes it easier to handle and transport.
All-layer drill All-layer drill

All-layer drill

The all-layer drill offers a solution to the challenge of sampling highly compacted materials. Its specially designed drill bits allow it to penetrate the medium and sample the full depth without much effort or time.
EasySampler sampler for solids EasySampler sampler for solids

EasySampler sampler for solids

The EasySampler provides fast sampling and emptying of free-flowing bulk solids by allowing the sample to be emptied directly into the collection container. A simple push on the handle opens the tip of the sampler and the sample can be emptied immediately.
Core drill for clogging bulk solids Core drill for clogging bulk solids

Core drill for clogging bulk solids

The two-part stainless steel core auger enables the sampling of poorly flowing bulk solids that easily jam or stick. The core drill can be easily dismantled for quick and thorough cleaning.